Kenwood MIDI M-97 Instruction Manual page 10

System connections
Connection of antennas
@ AM loop antenna connection
The supplied antenna is for indoor use. Place it as far as possi-
ble from the main system, TV set, speaker cords and power
cord, and set it to a direction which provides the best reception.
Connect to the
screw terminals. reception. Fix two ends.
H 75 © coaxial cable connection
@ Arrange the coaxial cable as illustrated.
Outer shield
Inne
(Braid) ey
conductor:
RG-6 (5C-2V) or RG-59 {3C-2V)}
® Insert into the slit on the clip. Fasten the
bands A and B, using a pair of pliers.
10 = _™-97/97MiEn)
Find the position that provides best
@® Open the antenna adaptor.
Open the claws with the fingers to
release the lock and pull out the cover.
@ AM outdoor antenna connection
If the reception is poor when the AM loop antenna is used, dis-
tribute a vinyl-coated wire of more than 6 meters outdoors,
without disconnecting the loop antenna.
@® Remove the inner conductor from the
groove of pole @ and insert it in the
groove of pole
© Connect the adaptor to the antenna ter-
minal.