Swann AMU-II ph/Redox Operator's Manual page 75

AMU-II pH/Redox
Program List and Explanations
5.4.4
5.4.5
5.5 Interface
5.5.1
5.5.20
5.5.30
5.5.40
5.5.1
5.5.21
5.5.31
5.5.41
5.5.1
5.5.1
A-96.150.441 / 230523
Password: Select a password different from 0000 to prevent unau-
thorized access to the menus "Messages", "Maintenance", "Opera-
tion" and "Installation".
Each menu can be protected by a different password. If you forgot
the passwords, contact the closest SWAN representative.
Sample ID: Identify the process value with any meaningful text, such
as KKS number.
Select one of the following communication protocols. Depending on
your selection, different parameters must be defined.
Protocol: Profibus
Device address:
ID-Nr.:
Local operation:
Protocol: Modbus RTU
Device address:
Baud Rate:
Parity:
Protocol: HyperTerminal
Baud Rate:
Protocol: HART
Device address:
Range: 0–126
Range: Analyzer; Manufacturer; Multivariable
Range: Enabled, Disabled
Range: 0–126
Range: 1200–115 200 Baud
Range: none, even, odd
Range: 1200–115 200 Baud
Range: 0–63
73