AMU-II pH/Redox
Product Description
Signal
outputs
Relays
Alarm relays
Input
Communica-
tion interface
Safety
features
pH electrode
8
Two signal outputs programmable for measured values (freely
scalable, linear, bilinear, log) or as continuous control output (control
parameters programmable).
Current loop:
Maximal burden:
Two potential-free contacts programmable as limit switches for
measured values, controllers or timer with automatic hold function.
Maximum load: 100 mA/50 V
Two potential-free contacts (one normally open and one normally
closed). Summary alarm indication for programmable alarm values
and instrument faults.
Normally open contact: closed during normal operation, open on
error and power loss.
Normally closed contact: open during normal operation, closed on
error and power loss
Maximum load: 100 mA / 50 V
One input for potential-free contact to freeze the measuring value or
to interrupt control in automated installations (hold function or remote
off).
RS232 interface for logger download with HyperTerminal
RS485 interface with fieldbus protocol Modbus or Profibus DP
(optional)
No data loss after power failure. All data is saved in non-volatile
memory. Overvoltage protection of inputs and outputs. Galvanic sep-
aration of measuring inputs from signal outputs.
For the AMU-II pH/Redox four types of pH electrodes are available.
The Swansensor pH Standard is a combined gel electrode for
application in drinking water and swimming pools. Gel electrodes
can not be filled again and have a limited life time.
The Swansensor pH SI is a combined electrode with liquid
electrolyte (KCl) for the measurement of pH in power plants.
The Swansensor pH AY is a combined gel electrode for application
in waste water due to additional salt supplies
The Swansensor pH FL for the measurement of pH in high purity
water. This sensor can only be used in combination with
Swansensor Reference FL, A-87.860.100.
0/4–20 mA
510 Ω
A-96.150.441 / 230523