Table of Contents
Advertisement
Synchronized Assemble Editing
Before you begin
Press TAPE SPEED to select the tape speed (SP or LP).
Press INPUT SELECT to select LINE IN 1 or LINE IN 2.
(When connected to the rear panel, select LINE IN 1. When connected to the front
panel, select LINE IN 2).
The L1 or L2 indicator appears in the display window of the VCR.
Check the LANC MODE setting (see page 60).
SYNCHRO EDIT
During synchronized editing
Operation
The edit function is activated
automatically.
1 Insert a recorded cassette into the other (playback) VCR and a cassette for
recording into this (recording) VCR.
2 Locate the recording start point on this VCR and put the VCR in recording pause
mode.
3 Locate the beginning of the scene to be edited out on the other VCR and put the
VCR in playback pause mode.
4 Press SYNCHRO EDIT on this VCR. The SYNCHRO EDIT indicator lights up.
Pause mode of both the recording VCR and the playback VCR is released to start
editing.
5 Press SYNCHRO EDIT on this VCR at the point where you want to stop recording.
This VCR enters recording pause mode, and the other VCR enters playback pause
mode.
6 If you have another scene you want to edit, repeat steps 3 to 5.
7 After editing has completed, press ll STOP on both VCRs.
Editing | 61
Advertisement
Table of Contents
