Insert Editing - Sony Hi8 EV-S2000 Operating Instructions Manual

Insert Editing
Before you begin
¢ Select the tape speed in which the cassette was recorded.
¢ Press INPUT SELECT to select LINE IN 1 or LINE IN 2.
(When connected to the rear panel, select LINE IN 1. When connected to the front
panel, select LINE IN 2.)
The L1 or L2 indicator appears in the display window of the VCR.
Tape on the playback VCR
' +
S| 8 | ee ESS.
Tape on the recording VCR @ t
Start point © End point @
Operation
1 Insert a recorded cassette into the other VCR and a cassette for recording into this
(recording) VCR.
2 Locate the editing end point (@) by playing back the cassette on this VCR and
press COUNTER RESET.
The counter reads "OHOOMO00S'.
3 Rewind the tape on this VCR and put the VCR in recording pause mode at the
editing start point (©).
4 Play the tape on the other VCR and put it in playback pause mode at the point
where the scene to be inserted appears on the screen.
5 Release recording pause mode of this VCR and playback pause mode of the other
VCR simultaneously.
6 Press @ STOP on this VCR to stop the recording at the editing end point (counter
reading reaches to OHOOMOOS) set in step 1.
7 Press ™@ STOP of the other VCR to stop the playback.