Table of Contents
Advertisement
Specifications
System
Video recording system
Rotary two-head helical scanning FM system
Audio recording
Rotary head, FM system (2 channels)
Video signal
NTSC color, EIA standards
Usable cassette
8mm video format cassettes
Tape speed
SP: approx. 1.43cm/sec.
LP: approx. 0.72cm/sec.
Maximum recording time
SP: 2 hours 30 minutes
LP: 5 hours
(with Sony P6-150)
Fast-forward and rewind time
Approx. 4 minutes (with Sony P6-120 cassette)
Tuner section
Channel coverage
VHF channels 2 to 13
UHF channels 14 to 69
Cable TV channels 1 to 125
VHF/UHF output signal
Channel 3 or 4 (selectable)
75 ohms, unbalanced
VHF/UHF input signal
75 ohms, F-type connector for VHF/UHF IN and
VHF/UHF OUT
inputs and outputs
Video input
LINE IN 1/2 VIDEO
(phono jack)
(1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
Video output LINE OUT 1/2 VIDEO
(phono jack)
(1 each)
Output signal:
1 Vp-p, 75 ohms, unbalanced,
sync negative
S VIDEO input
LINE IN 1/2 S VIDEO
(4-pin, mini-DIN)
(1 each)
Luminance signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
Chrominance signal: 0.286 Vp-p, 75 ohms,
unbalanced
S VIDEO output LINE OUT 1/2 S VIDEO
(4-pin, mini-DIN)
(1 each)
Luminance signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
Chrominance signal: 0.286 Vp-p, 75 ohms,
unbalanced
70
Additional Information
Audio input
LINE IN 1/2 AUDIO
(phono jack)
(2 each)
Input level: -7.5 dBs
Input impedance: more than 47 kilohms
Audio output LINE OUT1/2 AUDIO
(phono jack)
(2 each)
Standard impedance:
-7.5 dBs at load impedance
47 kilohms
Output impedance: less than 10 kilohms
CONTROL S IN
(mini jack)
CONTROL L
(3-pin mini-mini jack)
Timer
Clock
Quartz lock
Timer indication
12-hour digital indication
Timer setting
Only for recording
6 events/1 month max.
General
Power requirements
120 V AC, 60 Hz
Power consumption
30 W(max.)
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
-20°C to 60°C (-4°F to +140°F)
Dimensions
Approx. 430 x 92 x 325 mm (w/h/d)
Approx. 17 x 3°/,x 5'/, in
Mass
Approx. 4.9 kg (10 Ib 13 0z)
Remote Commander RMT-V123
Remote control system
Infrared control
Command mode Selectable VTR 1, 2 or 3
Power requirements
3V DC
2 size AA batteries
(IEC designation R6)
Supplied accessories, see page 5.
Design and specifications are subject to change without
notice.
Advertisement
Table of Contents
