Assemble Editing - Sony EV-S7000 Operating Instructions Manual

Assemble editing
Tips
© If the playback VCR you're
using does not have the
TIME CODE WRITE
function but only a real-time
counter, precise editing
cannot be guaranteed.
For the TIME CODE WRITE
function to work correctly,
you must enter the time code
on the entire portion of the
tape you want to edit.
When using the TIME CODE
WRITE function, you can
easily search for a desired
event as each frame is given
a readable code signal.
Notes
¢ The TIME CODE WRITE
function on this VCR and
that on professional-level
VCRs are not compatible.
¢ If you press another button
while writing the time code,
writing stops automatically.
If you use a tape that has
been recorded in both SP
and LP tape speeds, the
TIME CODE WRITE
function may not work
properly.
If you connect to a video
camera that shows streaks or
snow when freezing the
picture, the text on the screen
may be difficult to read.
Make your editing decisions
visually to ensure that the
events you want to edit are
precisely aligned.
When using the TIME CODE
WRITE function, a black
band may appear at the
bottom of the screen. This is
not an indication of a
malfunction. This black band
will not appear on the events
you are going to edit.
66 | Editing
You can insert as many events onto to the new tape that you require.
Using the assemble editing function, you can assemble edit up to eight
different events at a time.
to be
deleted Event 3
to be to be
Event 1
Event2 deleted Event4 deleted €Event5