Chevrolet 4500 HD 2023 Manual page 93

92 Infotainment System
Go Back to the First Position (Home Jump)
You can go back to the first file of the first
folder on the USB Memory being played
from any position of it. This function is
called Home Jump.
For example: If Home Jump is used when
playing File 5 in Folder 4, it goes back to
File 1 in Folder 1 and starts playing.
Press and hold down 5 for more than
one second.
Display Text Information
1. Press and hold down LIST for more than
one second.
2. Turn MODE/ /ENTER to select the
display item of your choice, and then
press ENTER.
The display item changes in the
following order.
FL/TR NO (Folder number/File number)
TIME (Playback time)
(Folder name) FILE (File name)
ALBUM (Album title)* TRACK (Track
title) ARTIST (Artist name)
TR NO...
* It is not displayed during the WMA file
playback.
If the text information is too long to fit into
the display window, press and hold down
FUNC for more than one second to switch to
the next page.
Texts recorded with characters other than
alphanumeric characters and symbols will
appear as "*" (asterisks).
If there is no text information stored in a
music file, NO TITLE is displayed.
If an Error Appears in the Display
The following messages are displayed (blink)
according to the status.
READING: This message is displayed when
reading the file format of the USB devices.
USB ERROR 1: This message is displayed
when the player cannot operate for some
reason. Disconnect the USB device from the
audio system.
USB ERROR 2: This message is displayed
when the connected USB device is disabled.
FOLDER
Connect another USB device.
FL/
USB ERROR 3: This message is displayed
when the USB hub is connected. Remove the
USB hub from the audio system.
NO MUSIC: This message is displayed when
a blank USB device or the USB device that
does not contain files with playback
extensions is connected.
READ ERROR: This message is displayed if a
problem is detected in the USB device.
Disconnect the USB device, and check the
USB device itself.
NO SUPPORT: This message is displayed
when the USB device contains no MP3/WMA
data (including MP3/WMA extension files) or
contains only SKIP FILEs.
iPod Operation
When an iPod is connected to the USB
terminal using an iPod connection cable,
users can operate the iPod from the main
unit and listen to music on the iPod.
See the instruction manual for the iPod
Connection Cable on how to connect and set
the connection cable.