Chevrolet 4500 HD 2023 Manual page 274

2. Slide the cornering lamp (3) and the side
turn signal lamp forward relative to the
vehicle. Disconnect the clip (1) on the
lamp s rear side from the door panel (2)
and pull out the lamp.
If you pull out the light rear section by
too much when removing the clip on the
rear side, the clip on the lamp front side
may be damaged.
3. When the clip (1) has been removed, pull
the lamp out while sliding it out toward
the rear of the vehicle.
4. Loosen the socket by turning it
counterclockwise.
Vehicle Care
5. Pull the bulb out from the socket and
replace it with a new one.
6. To install the lights, perform the same
sequence of operations in reverse taking
care of the following points:
A. Turn the socket clockwise to lock
securely.
If the socket is not locked securely,
water could get inside the light and
lead to a breakdown.
273