Chevrolet 4500 HD 2023 Manual page 36

Warning (Continued)
strike the vehicle interior or be crushed
by the person holding the child, or by
other occupants.
Be sure to follow all installation and use
instructions that come with any child
restraint system.
Child restraint systems are designed to be
secured in vehicle seats either by the lap
belt, or the lap portion of the lap-shoulder
belt at that seating position. The child must
also be secured within the restraint by the
means provided by the child restraint
manufacturer. If the child or the child
restraint is not properly secured, the child
risks personal injury in the event of a
collision.
Using a Lap Belt That Has No Retractor
When securing a child restraint with the
center seat lap belt, pull the excess webbing
through the belt's adjustment feature, then
take these steps:
Once installed, push and pull the child
restraint in all directions to be sure it is
secure. If it comes loose, flip the end of
the belt with the adjustment feature over
before rebuckling.
If the child restraint is still not secure, use
the outboard seating position in the
vehicle and contact your dealer and the
child restraint manufacturer for help.
Secure the child in the restraint in
accordance with the child restraint
manufacturer's instructions.
Seats and Restraints
Installation on Outboard Seat
A seat belt locking clip is required for
installation of a child restraint system on
the outboard seat of this vehicle. A locking
clip may usually be obtained where child
restraints are sold, or by contacting your
dealer for assistance. Make sure the locking
clip is identical to the one shown on this
page. Until you have the clip, use the child
restraint system only in the center seat.
35