Page 1: Table Of Contents
2007 Chevrolet Malibu Owner Manual Seats and Restraint Systems ... 7 Front Seats ... 8 Rear Seats ... 17 Safety Belts ... 20 Child Restraints ... 44 Airbag System ... 74 Restraint System Check Features and Controls ... 95 Keys ...
Page 2 Service and Appearance Care ... 339 Service ... 342 Fuel ... 344 Checking Things Under the Hood ... 350 Bulb Replacement ... 390 Windshield Wiper Blade Replacement Tires ... 398 Appearance Care ... 436 Vehicle Identiﬁcation ... 445 Electrical System ...
Page 3: Canadian Owners
For vehicles ﬁrst sold in Canada, substitute the name “General Motors of Canada Limited” for Chevrolet Motor Division whenever it appears in this manual. Litho in U.S.A. Part No. 15864103 A First Printing...
Page 4: How To Use This Manual
How to Use This Manual Many people read the owner manual from beginning to end when they ﬁrst receive their new vehicle. If this is done, it can help you learn about the features and controls for the vehicle. Pictures and words work together in the owner manual to explain things.
Page 5: Vehicle Symbols
Vehicle Damage Warnings Also, in this manual you will ﬁnd these notices: Notice: These mean there is something that could damage your vehicle. A notice tells about something that can damage the vehicle. Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly.
Page 6 These are some examples of symbols that may be found on the vehicle:...
Page 7: Seats And Restraint Systems
Section 1 Front Seats ... 8 Manual Seats ... 8 Power Seat ... 9 Manual Lumbar ... 9 Heated Seats ... 10 Reclining Seatbacks ... 10 Head Restraints ... 13 Passenger Folding Seatback (Maxx) ... 14 Power Lift Seat ... 16 Rear Seats ...
Page 8: Front Seats
Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
Page 9: Power Seat
Power Seat If the vehicle has a power seat, the control used to operate it is located on the outboard side of the driver’s seat. To adjust the seat, do any of the following: • Move the seat forward or rearward by sliding the control forward or rearward.
Page 10: Heated Seats
Heated Seats Your vehicle may have heated front seats. The buttons are located on the outboard side of the driver’s and front passenger’s seats. Press the top of the switch to turn the feature on. The seat will heat to the high setting. The indicator light above the switch will be lit next to the number 2.
Page 11 The seats have manual reclining seatbacks. The lever used to operate them is located on the outboard side of the seats. To recline the seatback, do the following: 1. Lift the recline lever. 2. Move the seatback to the desired position, then release the lever to lock the seatback in place.
Page 12 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job because it will not be against your body.
Page 13: Head Restraints
Head Restraints Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. This position reduces the chance of a neck injury in a crash. Pull the restraint up to raise it.
Page 14: Passenger Folding Seatback (Maxx)
Passenger Folding Seatback (Maxx) Your vehicle may have a passenger folding seatback. This feature allows for more cargo space or allows the seatback to be used as a temporary table while the vehicle is stopped. CAUTION: If you fold the seatback forward to carry longer objects, such as skis, be sure any such cargo is not near an airbag.
Page 15 To fold the seatback forward, do the following: 1. Make sure the seatback is in the most upright position and locked by using the reclining seatback lever on the outboard side of the seat. See Reclining Seatbacks on page 10. Seat without Side Impact Airbag shown, Seat with Side Impact Airbag similar 2.
Page 16: Power Lift Seat
CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked. 2. Push and pull the seatback to make sure it is locked into place.
Page 17: Rear Seats
Rear Seats Rear Seat Operation Folding the Seatback Your vehicle has a split folding rear seatback. To fold down the rear seatback on the sedan, do the following: 1. Open the trunk and pull one or both of the handles located on the upper part of the trunk opening.
Page 18 Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 2. Once a lever is pulled, the seatback can be pushed into the down position.
Page 19 CAUTION: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted.
Page 20: Safety Belts
Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. CAUTION: Do not let anyone ride where he or she cannot wear a safety belt properly.
Page 21 Your vehicle has a light that comes on as a reminder to buckle up. See Safety Belt Reminder Light on page 203. In most states and in all Canadian provinces, the law says to wear safety belts. Here is why: They work.
Page 22 Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it is just a seat on wheels.
Page 23 Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield...
Page 24 or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense.
Page 25: Questions And Answers About Safety Belts
Questions and Answers About Safety Belts Will I be trapped in the vehicle after an accident if I am wearing a safety belt? You could be — whether you are wearing a safety belt or not. But you can unbuckle a safety belt, even if you are upside down.
Page 26: How To Wear Safety Belts Properly
How to Wear Safety Belts Properly This part is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see Older Children on page 44 or Infants and Young Children on page 47.
Page 27 4. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 43. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 28 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 29 What is wrong with this? The shoulder belt is too loose. It will not give nearly as much protection this way. CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
Page 30 What is wrong with this? The lap belt is too loose. It will not give nearly as much protection this way. CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force at your abdomen.
Page 31 What is wrong with this? The belt is buckled in the wrong place. CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen.
Page 32 What is wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
Page 33 What is wrong with this? The belt is twisted across the body. CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to ﬁx it.
Page 34: Shoulder Belt Height Adjustment
To unlatch the belt, push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
Page 35: Safety Belt Use During Pregnancy
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.
Page 36: Rear Seat Passengers
Rear Seat Passengers It is very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who are not safety belted can be thrown out of the vehicle in a crash.
Page 37 2. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. When the shoulder belt is pulled out all the way, it will lock. If it does, let it go back all the way and start again.
Page 38 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 39: Rear Safety Belt Comfort Guides
To unlatch the belt, push the button on the buckle. Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the belt away from the neck and head.
Page 40 2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies ﬂat.
Page 41 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
Page 42 Malibu MAXX There is a safety belt routing guide attached to each outside passenger position in the rear seat of the Malibu MAXX. Here is how to use the safety belt routing guide: 1. Slide the edge of the safety belt (D) through the opening at the top of the guide (B).
Page 43: Safety Belt Pretensioners
Safety Belt Pretensioners Your vehicle has safety belt pretensioners for the driver and right front passenger. Although you cannot see them, they are part of the safety belt assembly. They help tighten the safety belts during the early stages of a moderate to severe frontal and near frontal crash if the threshold conditions for pretensioner activation are met.
Page 44: Child Restraints
Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. What is the proper way to wear safety belts? An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.
Page 45 CAUTION: Never do this. Here two children are wearing the same belt. The belt can not properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time.
Page 46 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
Page 47: Infants And Young Children
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
Page 48 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) baby will suddenly become a 240 lb (110 kg) force...
Page 49 CAUTION: Children who are up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 50 What are the different types of add-on child restraints? Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.
Page 51: Child Restraint Systems
CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should.
Page 52 A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.
Page 53 A booster seat (F-G) is a child restraint designed to improve the ﬁt of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a ﬁve-point harness. A booster seat can also help a child to see out the window.
Page 54 Securing an Add-on Child Restraint in the Vehicle CAUTION: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Make sure the child restraint is properly installed in the vehicle using the vehicle’s safety belt or LATCH system, following the instructions that came with that restraint, and also the...
Page 55: Where To Put The Restraint
Securing the Child Within the Child Restraint There are several systems for securing the child within the child restraint. One system, the three-point harness, has straps that come down over each of the infant’s shoulders and buckle together at the crotch. The ﬁve-point harness system has two shoulder straps, two hip straps, and a crotch strap.
Page 56 Never put a rear-facing child restraint in the right front passenger seat. Here is why: CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s airbag inﬂates. This is because the back of the rear-facing child restraint would be very close to the inﬂating airbag.
Page 57 Conﬁgurations for Use of Child Restraints A. Child restraint using LATCH B. Child restraint or occupant using safety belt A. Occupant prohibited B. Child restraint using LATCH A. Child restraint using LATCH B. Child restraint or occupant using safety belt C.
Page 58: Lower Anchors And Tethers For Children (Latch)
Lower Anchors and Tethers for Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system Make sure that a LATCH-compatible child restraint...
Page 59 Top Tether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.
Page 60 Lower Anchor and Top Tether Anchor Locations Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors. Rear Seat To assist you in locating the lower anchors, each rear anchor position has a label, near the crease between the seatback and the seat cushion.
Page 61 Sedan For sedan models, the top tether anchors are located behind the rear seat on the ﬁller panel. MAXX For MAXX models, the top tether anchors are located on the back of the rear seatback. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed.
Page 62 Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. See Where to Put the Restraint on page 55 for additional information. Securing a Child Restraint Designed for the LATCH System CAUTION: If a LATCH-type child restraint is not attached to anchors, the restraint will not...
Page 63 CAUTION: Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Secure any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has been...
Page 64 Sedan A. Passenger’s Side Rear Seat Lower Anchors B. Center Rear Seat Lower Anchors C. Driver’s Side Rear Seat Lower Anchors MAXX A. Passenger’s Side Rear Seat Lower Anchors B. Center Rear Seat Lower Anchors C. Driver’s Side Rear Seat Lower Anchors Make sure to attach the child restraint at the proper anchor location.
Page 65 This system is designed to make installation of child restraints easier. When using lower anchors, do not use the vehicle’s safety belts. Instead use the vehicle’s anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether.
Page 66 If the position you are using does not have a head restraint and you are using a dual tether, route the tether over the seatback. If the position you are using has an adjustable head restraint and you are using a single tether, route the tether under the head restraint and in between...
Page 67: Securing A Child Restraint In A Rear Seat Position
Securing a Child Restraint in a Rear Seat Position If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 58. If your child restraint does not have the LATCH system, you will be using the lap-shoulder belt to secure the child restraint in this position.
Page 68 4. Pull the rest of the shoulder belt all the way 5. To tighten the belt, push down on the child out of the retractor to set the lock. restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor.
Page 69: Securing A Child Restraint In The Right Front Seat Position
6. If your child restraint manufacturer recommends using a top tether, attach and tighten the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and see Lower Anchors and Tethers for Children (LATCH) on page 58. 7.
Page 70 A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbags deploy. CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s airbag inﬂates.
Page 71 If you need to secure a forward-facing child restraint in the right front seat position, move the seat as far back as it will go before securing the forward-facing child restraint. See Manual Seats on page 8 or Power Seat on page 9. If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 58.
Page 72 2. Put the child restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 73 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 74: Airbag System
Airbag System Your vehicle has a frontal airbag for the driver and another frontal airbag for the right front passenger. Your vehicle may also have a seat-mounted side impact airbag for the driver and for the right front passenger. Your vehicle may also have roof-mounted side impact airbags.
Page 75 CAUTION: (Continued) Frontal airbags for the driver and right front passenger are designed to deploy in moderate to severe frontal and near frontal crashes. They are not designed to inﬂate in rollover, rear crashes, or in many side crashes. And, for some unrestrained occupants, frontal airbags may provide less protection in frontal crashes than more forceful airbags have provided in...
Page 76: Where Are The Airbags
CAUTION: Anyone who is up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 77 The right front passenger’s frontal airbag is in the instrument panel on the passenger’s side. If your vehicle has a seat-mounted side impact airbag for the driver, it is in the side of the driver’s seatback closest to the door.
Page 78 If your vehicle has a seat-mounted side impact airbag for the right front passenger, it is in the side of the passenger’s seatback closest to the door. If your vehicle has a roof-mounted side impact airbag for the driver and the person seated directly behind the driver, it is in the ceiling above the side windows.
Page 79 If your vehicle has a roof-mounted side impact airbag for the right front passenger and the person seated directly behind that passenger, it is in the ceiling above the side windows. CAUTION: If something is between an occupant and an airbag, the airbag might not inﬂate properly or it might force the object into that person causing severe injury or even death.
Page 80: When Should An Airbag Inﬂate
When Should an Airbag Inﬂate? The driver’s and right front passenger’s frontal airbags are designed to inﬂate in moderate to severe frontal or near-frontal crashes. But they are designed to inﬂate only if the impact exceeds a predetermined deployment threshold. Deployment thresholds take into account a variety of desired deployment and non-deployment events and are used to predict how severe a crash is likely to be in...
Page 81: What Makes An Airbag Inﬂate
Frontal airbags (driver and right front passenger) are not intended to inﬂate during vehicle rollovers, rear impacts, or in many side impacts. Your vehicle may or may not have side impact airbags. See Airbag System on page 74 for more information.
Page 82: What Will You See After An Airbag Inﬂates
Airbags distribute the force of the impact more evenly over the occupant’s upper body, stopping the occupant more gradually. But the frontal airbags would not help you in many types of collisions, including rollovers, rear impacts, and many side impacts, primarily because an occupant’s motion is not toward the airbag.
Page 83 CAUTION: When an airbag inﬂates, there may be dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so.
Page 84: Passenger Sensing System
Passenger Sensing System Your vehicle has a passenger sensing system. The passenger airbag status indicator on the instrument panel will be visible when you turn your ignition key to ON or START. United States The words ON and OFF or the symbol for on and off, will be visible during the system check.
Page 85 Your vehicle has a rear seat that will accommodate a rear-facing child restraint. A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right...
Page 86 The passenger sensing system is designed to turn off the right front passenger’s frontal airbag if: • The right front passenger seat is unoccupied. • The system determines that an infant is present in a rear-facing infant seat. • The system determines that a small child is present in a forward-facing child restraint.
Page 87 If the on indicator is still lit, secure the child in the child restraint in a rear seat position in the vehicle and check with your dealer. The passenger sensing system is designed to enable (may inﬂate) the right front passenger’s frontal airbag anytime the system senses that a person of adult size is sitting properly in the right front passenger’s seat.
Page 88 CAUTION: If the airbag readiness light in the instrument panel cluster ever comes on and stays on, it means that something may be wrong with the airbag system. If this ever happens, have the vehicle serviced promptly, because an adult-size person sitting in the right front passenger’s seat may not have the protection of the frontal airbag.
Page 89 You may want to consider not using seat covers or other aftermarket equipment if your vehicle has the passenger sensing system. See Adding Equipment to Your Airbag-Equipped Vehicle on page 91 for more information about modiﬁcations that can affect how the system operates.
Page 90: Servicing Your Airbag-Equipped Vehicle
Servicing Your Airbag-Equipped Vehicle Airbags affect how your vehicle should be serviced. There are parts of the airbag system in several places around your vehicle. You do not want the system to inﬂate while someone is working on your vehicle. Your dealer and the service manual have information about servicing your vehicle and the airbag system.
Page 91: Airbag-Equipped Vehicle
Adding Equipment to Your Airbag-Equipped Vehicle Is there anything I might add to the front or sides of the vehicle that could keep the airbags from working properly? Yes. If you add things that change your vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
Page 92: Restraint System Check
Restraint System Check Checking the Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors, and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
Page 93: Replacing Restraint System Parts
Replacing Restraint System Parts After a Crash CAUTION: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary...
Page 94 If the frontal airbags inﬂate you will need to replace the driver’s and right front passengers safety belt retractor assembly. Be sure to do so. Then the new retractor assembly will be there to help protect you in a collision. After a crash you may need to replace the driver and front passenger’s safety belt retractor assemblies, even if the frontal airbags have not...
Page 95: Features And Controls
Section 2 Keys ... 97 Remote Keyless Entry (RKE) System ... 99 Remote Keyless Entry (RKE) System Operation ... 100 Doors and Locks ... 107 Door Locks ... 107 Power Door Locks ... 108 Door Ajar Reminder ... 108 Delayed Locking ... 108 Programmable Automatic Door Locks ...
Page 96 Section 2 Automatic Dimming Rearview Mirror ® with OnStar and Compass ... 140 Automatic Dimming Rearview Mirror with Compass ... 142 Outside Power Mirrors ... 144 Outside Power Heated Mirrors ... 144 Outside Convex Mirror ... 144 ® OnStar System ... 145 Universal Home Remote System ...
Page 97: Keys
Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed. Do not leave the keys in a vehicle with children.
Page 98 One key is used for the ignition and all locks. When a new vehicle is delivered, the key has a bar-coded key tag. This tag may be removed by your dealer before it is delivered. Each tag has a key code on it that tells your dealer or a qualiﬁed locksmith how to make extra keys.
Page 99: Remote Keyless Entry (Rke) System
Remote Keyless Entry (RKE) System If the vehicle has the Remote Keyless Entry (RKE) system, it operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules.
Page 100 Remote Keyless Entry (RKE) System Operation The vehicle’s doors may be locked and unlocked, and the trunk or liftgate may be opened from about 3 feet (1 m) up to 197 feet (60 m) away with the remote keyless entry transmitter. If your vehicle has the remote vehicle start feature, you can also start the vehicle’s engine with the remote keyless entry transmitter.
Page 101 (Unlock): Press the unlock button to unlock the driver’s door. If the button is pressed again within ﬁve seconds, all remaining doors, and the liftgate will unlock. The interior lamps will turn on and stay on for 20 seconds or until the ignition is turned on.
Page 102 Matching Transmitter(s) to Your Vehicle Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your GM dealer. Remember to bring any remaining transmitters with you when you go to your dealer.
Page 103 To replace the battery in the remote keyless entry transmitter do the following: 1. Insert a ﬂat object, with a thin edge, into the notch located below the vehicle locator/panic alarm button, and separate the bottom half from the top half of the transmitter. 2.
Page 104 Remote Vehicle Start Your vehicle may have a remote start feature. This feature allows you to start the engine from outside the vehicle. It may also start the vehicle’s heating or air conditioning systems and rear window defogger. When the remote start system is active and the vehicle has an automatic climate control system, it may automatically regulate the inside temperature.
Page 105 (Remote Start): If your vehicle has the remote start feature, the keyless entry transmitter will have a button with this symbol on it. To start the vehicle using the remote start feature, do the following: 1. Aim the transmitter at the vehicle. 2.
Page 106 The remote vehicle start feature will not operate if any of the following occur: • The remote start system is disabled through the DIC. • The vehicle’s key is in the ignition. • The vehicle’s hood is open. • The hazard warning ﬂashers are on. •...
Page 107: Doors And Locks
Doors and Locks Door Locks CAUTION: Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked.
Page 108: Power Door Locks
Power Door Locks The power door lock switches are located on the driver’s and front passenger’s door. Press the top of the switch to unlock all doors and liftgate, if equipped. Press the bottom of the switch to lock all doors and liftgate, if equipped. The rear doors do not have power door lock switches.
Page 109 Press the driver’s power door lock switch or the remote keyless entry transmitter lock button once. With the key removed from the ignition and the driver’s door open, the following will occur: • Three chimes will sound to signal the delay. •...
Page 110: Programmable Automatic Door Locks
Programmable Automatic Door Locks Your vehicle is programmed at the factory to lock all doors automatically when the following are met: • all doors are closed • the ignition is on • the shift lever is moved out of PARK (P). This feature cannot be disabled.
Page 111: Lockout Protection
To set the locks, do the following: 1. Insert the key into the security lock slot and turn it so the slot is in the horizontal position. 2. Close the door. When you want to open a rear door when the security lock is on, do the following: 1.
Page 112: Trunk (Sedan)
Trunk (Sedan) To unlock the trunk from the outside, use the key or the remote keyless entry transmitter. When closing the trunk, close from the center to ensure it fully latches. CAUTION: It can be dangerous to drive with the trunk lid open because carbon monoxide (CO) gas can come into your vehicle.
Page 113: Liftgate (Maxx)
You can open the trunk lid on the sedan or the liftgate on the MAXX only while the vehicle is in PARK (P) or the ignition is off. Emergency Trunk Release Handle Notice: Do not use the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk as it could damage the handle.
Page 114: Windows
Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 115: Power Windows
Power Windows The power window switches are located on the armrest on the driver’s door. In addition, each passenger door has a switch for its own window. Express-Down Window The driver’s window also has an express-down feature. This switch is labeled AUTO. Press the front of the switch part way, and the driver’s window will open a small amount.
Page 116: Theft-Deterrent Systems
Theft-Deterrent Systems Vehicle theft is big business, especially in some cities. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it impossible to steal. Content Theft-Deterrent Your vehicle may have a content theft-deterrent alarm system.
Page 117 Disarming the System You can disarm the system by doing any one of the following: • Press the remote keyless entry transmitter unlock button. • Turn the ignition on. • Turn the driver’s door key lock cylinder counterclockwise. Once the system is disarmed, the security light will stop ﬂashing.
Page 118 ® PASS-Key III+ ® The PASS-Key III+ system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Page 119: Pass-Key Iii+ Operation
If your vehicle does start, the ﬁrst key may be faulty. See your dealer who can service the PASS-Key made. In an emergency, contact Chevrolet Roadside Assistance. See Roadside Assistance Program on page 484 for more information. It is possible for the PASS-Key “learn”...
Page 120: Starting And Operating Your Vehicle
To program the new key do the following: 1. Verify that the new key has “+” stamped on it. 2. Insert the already programmed key in the ignition and start the engine. If the engine will not start, see your dealer for service. 3.
Page 121: Ignition Positions
Ignition Positions With the key in the ignition switch, you can turn it to four different positions. Notice: Using a tool to force the key from the ignition switch could cause damage or break the key. Use the correct key and turn the key only with your hand.
Page 122: Retained Accessory Power (Rap)
Key In the Ignition Never leave your vehicle with the keys inside, as it is an easy target for joy riders or thieves. If you leave the key in the ignition and park your vehicle, a chime will sound, when you open the driver’s door.
Page 123: Starting The Engine
Starting the Engine Place the transaxle in the proper gear. Move your shift lever to PARK (P) or NEUTRAL (N). Your engine will not start in any other position -- this is a safety feature. To restart when you are already moving, use NEUTRAL (N) only.
Page 124: Adjustable Throttle And Brake Pedal
2. If the engine does not start after 5-10 seconds, especially in very cold weather (below 0°F or 18°C), it could be ﬂooded with too much gasoline. Try pushing the accelerator pedal all the way to the ﬂoor and holding it there as you hold the key in START for up to a maximum of 15 seconds.
Page 125: Engine Coolant Heater
To use your adjustable throttle and brake pedal feature, do the following: The adjustable pedal feature is meant to be used with the adjustable seat and adjustable steering wheel controls to reach a safe and comfortable position. 1. Adjust your seat to a comfortable position where you can comfortably reach other controls such as the radio and climate controls.
Page 126 To Use the Engine Coolant Heater 1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. On the 2.2L engine, the engine coolant heater cord is located near the air cleaner box on the passenger’s side of the engine compartment. On the 3.5L and 3.9L V6 engines, the engine coolant heater cord is located on the driver’s side around the battery box.
Page 127: Automatic Transaxle Operation
Automatic Transaxle Operation (Base Models) Your automatic transaxle has a shift lever located on the console between the seats. PARK (P): This position locks your front wheels. It is the best position to use when you start your engine because your vehicle cannot move easily. CAUTION: It is dangerous to get out of your vehicle if the shift lever is not fully in PARK (P)
Page 128 Make sure the shift lever is fully in PARK (P) before starting the engine. Your vehicle has an automatic transaxle shift lock control system. You must fully apply your regular brake ﬁrst and then press the shift lever button before you can shift from PARK (P) when the ignition key is in ON.
Page 129 DRIVE (D): This position is for normal driving. It provides the best fuel economy for your vehicle. If you need more power for passing, and you are: • Going less than 35 mph (56 km/h), push your accelerator pedal about halfway down. •...
Page 130: Automatic Transaxle Operation
L4 (LOW 4): This position does not limit gears, but provides more engine braking, and lower fuel economy, than DRIVE (D). The actual gear is determined by throttle and vehicle speed. L3 (LOW 3/DRIVE 3): This position prevents fourth gear operation. Actual gear is determined by throttle and vehicle speed.
Page 131 CAUTION: It is dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set. Your vehicle can roll. Do not leave your vehicle when the engine is running unless you have to. If you have left the engine running, the vehicle can move suddenly.
Page 132 NEUTRAL (N): In this position, your engine does not connect with the wheels. To restart when you are already moving, use NEUTRAL (N) only. Also, use NEUTRAL (N) when your vehicle is being towed. CAUTION: Shifting into a drive gear while your engine is running at high speed is dangerous.
Page 133 To use this feature, do the following: 1. Move the shift lever from DRIVE (D) rearward into the MANUAL MODE (M). The vehicle will be in the MANUAL MODE (M) and a gear based on the current driving speed. While driving in MANUAL MODE (M), the transaxle will remain in the selected drive gear unless: •...
Page 134: Parking Brake
With the DSC feature, the vehicle can be set to pull away in Second gear. 1. Move the shift lever from DRIVE (D) into the MANUAL MODE (M). 2. With the vehicle stopped, press (+) end of the button to select Second gear. The vehicle will start from a stop position in Second gear.
Page 135: Shifting Into Park (P)
Shifting Into Park (P) CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
Page 136: Shifting Out Of Park (P)
Torque Lock If you are parking on a hill and you do not shift your transaxle into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the transaxle. You may ﬁnd it difficult to pull the shift lever out of PARK (P).
Page 137: Parking Over Things That Burn
Parking Over Things That Burn CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn.
Page 138: Engine Exhaust
Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you cannot see or smell. It can cause unconsciousness and death. You might have exhaust coming in if: • Your exhaust system sounds strange or different. •...
Page 139: Running The Engine While Parked
Running the Engine While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle.
Page 140: Mirrors
Mirrors Manual Rearview Mirror This mirror can be adjusted two ways. First, to adjust the angle of the mirror, move the mirror to a position that allows you to see out of the back window. To adjust the height of the mirror, adjust the arm that connects the mirror to the windshield.
Page 141 Compass Calibration If after a few seconds the display does not show a compass direction, (N for North for example), there may be a strong magnetic ﬁeld interfering with the compass. Such interference may be caused by a magnetic antenna mount, note pad holder, or similar object.
Page 142: With Compass
Automatic Dimming Rearview Mirror with Compass Your vehicle may have an automatic dimming rearview mirror with a compass. This feature enables the mirror to sense nighttime glare from vehicle headlamps from behind and automatically dim to reduce the glare to a safe level. The automatic dimming feature turns on each time the vehicle is started.
Page 143 Compass Variance Compass variance is the difference between earth’s magnetic north and true geographic north. If the mirror is not adjusted for compass variance, the compass could give false readings. The mirror is set in zone eight upon leaving the factory. It will be necessary to adjust the compass to compensate for compass variance if the vehicle is driven outside zone eight.
Page 144: Outside Power Mirrors
Outside Power Mirrors The controls for the outside power mirrors are located on the driver’s door armrest. Use the selector switch located below the four-way control panel to choose either the left or right outside mirror. Then press any of the four arrows located on the control pad to move each mirror in the desired direction.
Page 145: Onstar ® System
® OnStar System ® OnStar uses several innovative technologies and live advisors to provide you with a wide range of safety, security, information, and convenience services. If your airbags deploy, the system is designed to make an automatic call to OnStar Emergency advisors who can request emergency services be sent to your location.
Page 146 Available Services with Safe & Sound • Automatic Notiﬁcation of Airbag Deployment • Advanced Automatic Crash Notiﬁcation (AACN) (If equipped) • Link to Emergency Services • Roadside Assistance • Stolen Vehicle Location Assistance • AccidentAssist • Remote Door Unlock/Vehicle Alert ®...
Page 147 ® OnStar Steering Wheel Controls Your vehicle may have a Talk/Mute button that can be used to interact with OnStar Calling. See Audio Steering Wheel Controls (Three Spoke) on page 281 or Audio Steering Wheel Controls (Four Spoke) on page 282 for more information.
Page 148: Universal Home Remote System
® OnStar service cannot work unless your vehicle ® is in a place where OnStar has an agreement with a wireless service provider for service in that ® area. OnStar service also cannot work unless you are in a place where the wireless service ®...
Page 149: Universal Home Remote System (With One Triangular Led)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. The FCC Grant of Equipment Authorization Certiﬁcate number is KOBGTE05A.
Page 150: Universal Home Remote System Operation (With Three Round Led)
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device. The Canadian Registration ID number is 2791021849A.
Page 151 Do not use the this system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read the instructions completely before attempting to program the transmitter. Because of the steps involved, it may be helpful to have another person available to assist you in programming the transmitter.
Page 152 Programming Universal Home Remote — Fixed Code Fixed Code garage door openers are used for garage doors produced prior to 1996. Fixed code uses the same coded signal every time, which is manually programmed by setting DIP switches for a unique personal code. Follow these steps to program up to three channels: 1.
Page 153 Example 4. The indicator light will blink slowly. In order from left to right, and within two and one-half minutes, enter each switch setting into the Universal Home Remote System. Push one button for each switch as follows: • Left button = “on” switch position. •...
Page 154 Programming Universal Home Remote — Rolling Code Rolling code garage door openers are used for garage doors produced after 1996 and are code protected. Rolling code means the coded signal is changed every time your remote control garage door opener is used. Programming a rolling code garage door opener involves time-sensitive actions, so read the entire procedure before you begin.
Page 155 3. Press and hold the button you would like to use to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. You may need to hold the button from ﬁve to 20 seconds.
Page 156: Universal Home Remote System Operation (With One Triangular Led)
Universal Home Remote System Operation (With One Triangular LED) Your vehicle may have the Universal Home Remote System. If there is one triangular Light Emitting Diode (LED) above the Universal Home Remote buttons, follow the instructions below. If your vehicle has three round LED above the Universal Home Remote buttons, follow the instructions under Universal Home Remote System Operation (with three round LED).
Page 157 Programming Universal Home Remote Follow these steps to program up to three channels: 1. Press and hold down the two outside Universal Home Remote buttons, releasing only when the Universal Home Remote indicator light begins to ﬂash, after 20 seconds. Do not hold down the buttons for longer than 30 seconds and do not repeat this step to program a second and/or third hand-held transmitter to the remaining...
Page 158 6. Locate in the garage, the garage door opener receiver (motor-head unit). Locate the “Learn” or “Smart” button. This can usually be found where the hanging antenna wire is attached to the motor-head unit. 7. Firmly press and release the “Learn” or “Smart”...
Page 159: Storage Areas
Using Universal Home Remote Press and hold the appropriate Universal Home Remote button for at least half of a second. The indicator light will come on while the signal is being transmitted. Erasing Universal Home Remote Buttons To erase programming from the three Universal Home Remote buttons do the following: 1.
Page 160: Cupholder(S)
Cupholder(s) There is a cupholder next to the shift lever and another, if equipped, at the rear of the shift lever. If your vehicle has rear seat cupholders, pull down the door on the back of the center console to access them. Center Console Storage Area There is a storage compartment in the center console area.
Page 161 To use the panel in the lower position, do the following: 1. Insert the front corners of the panel into the lower guides. 2. Slide the panel forward. 3. Press down on the back of the panel. The panel can be used in this position if you need additional space above the panel.
Page 162: Sunroof
Table (MAXX) Your vehicle may have an adjustable panel that also functions as a table. The maximum load for the table is 100 lbs distributed (45 kg). To set up the table, do the following: 1. Place the front corners into the rear upper guides.
Page 163 The sunroof will only operate when the ignition is in ACC or ON, or while retained accessory power (RAP) is active. See Retained Accessory Power (RAP) on page 122 for more information. The sunroof can be opened to a vent position or it can be express-opened all of the way.
Page 164 NOTES...
Page 165: Instrument Panel
Section 3 Instrument Panel Overview ... 168 Hazard Warning Flashers ... 170 Other Warning Devices ... 170 Horn ... 170 Tilt and Telescopic Steering Wheel ... 170 Turn Signal/Multifunction Lever ... 171 Turn and Lane-Change Signals ... 172 Headlamp High/Low-Beam Changer ... 172 Flash-to-Pass ...
Page 166 Section 3 Airbag Readiness Light ... 204 Passenger Airbag Status Indicator ... 205 Charging System Light ... 207 Brake System Warning Light ... 207 Anti-Lock Brake System Warning Light ... 208 Traction Control System (TCS) Warning Light ... 209 Traction Control System Active Light ...
Page 167 Section 3 Audio Steering Wheel Controls (Four Spoke) ... 282 Radio Reception ... 283 Care of Your CDs and DVDs ... 284 Instrument Panel Care of the CD and DVD Player ... 284 Fixed Mast Antenna (MAXX Only) ... 284 Backglass Antenna (Sedan Only) ...
Page 168: Instrument Panel Overview
Instrument Panel Overview...
Page 169 The main components of your instrument panel are the following: A. Side Window Outlets. See Climate Control System on page 189. B. Turn Signal/Multifunction Lever. See Turn Signal/Multifunction Lever on page 171. C. Cruise Controls (If Equipped). See Cruise Control on page 176. D.
Page 170: Hazard Warning Flashers
X. Center Console Storage Compartment. See Center Console Storage Area on page 160. Y. Traction Control Button or Enhanced Traction System Button (If Equipped). See Traction Control System (TCS) on page 296 Enhanced Traction System (ETS) on page 297. Z. Rear Wiper/Washer Controls (If Equipped). See Windshield Washer on page 174.
Page 171: Turn Signal/Multifunction Lever
To tilt and telescope the wheel, pull down the lever. Then move the wheel to a comfortable position, pull up the lever to lock the wheel in place. The wheel can be adjusted up and down as well as forward and backward. Turn Signal/Multifunction Lever The lever on the left side of the steering column includes the following:...
Page 172: Turn And Lane-Change Signals
Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down to the latched position.
Page 173: Flash-To-Pass
Flash-to-Pass This feature lets you use your high-beam headlamps momentarily to signal a driver in front of you that you want to pass. To use it, pull the turn signal/multifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off. Windshield Wipers Be sure to clear ice and snow from the wiper blades before using them.
Page 174: Windshield Washer
(Delay/Intermittent Speed Sensitive): When the lever is in the delay position, move the intermittent adjust band to set for shorter or longer delay cycles. To the left of the adjust band are bars that indicate the frequency of the wipes. Smaller bars mean the wiper movement is less frequent.
Page 175: Rear Window Wiper/Washer
Rear Window Wiper/Washer (MAXX Model) CAUTION: In freezing weather, do not use your washer until the windshield is warmed. Otherwise the washer ﬂuid can form ice on the windshield, blocking your vision. If your vehicle has a rear window wiper, the switch is located on the center console.
Page 176: Cruise Control
Cruise Control With cruise control, you can maintain a speed of about 25 mph (40 km/h) or more without keeping your foot on the accelerator. This can really help on long trips. Cruise control does not work at speeds below about 25 mph (40 km/h). CAUTION: Cruise control can be dangerous where you cannot drive safely at a steady speed.
Page 177 SET– (Set/Coast): Press this button to set the speed or to decrease the set speed. (Cancel): Press this button to cancel cruise control. Cruise control will not work if your parking brake is set, or if the master cylinder brake ﬂuid level is low. The cruise control light on the instrument panel cluster will come on after the cruise control has been set to the desired speed.
Page 178 Resuming a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake. This shuts off the cruise control. But you don’t need to reset it. Once you are driving about 25 mph (40 km/h) or more, press the RES+ button on your steering wheel.
Page 179: Exterior Lamps
Using Cruise Control on Hills How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. When going up steep hills, you may have to step on the accelerator pedal to maintain your speed.
Page 180 The exterior lamp switch has the following four positions: (Headlamps): This position turns on the headlamps, parking lamps, and taillamps. (Parking Lamps): This position turns on the parking lamps and taillamps only. AUTO (Automatic Headlamp System): This position automatically turns on the Daytime Running Lamps during daytime, and the headlamps, parking lamps, and taillamps at night.
Page 181 United States Exterior Lamp Positions for Nighttime Lamps Headlamp Parking Lamp Taillamp Canadian Exterior Lamp Positions for Daytime Lamps Headlamp DRL Mode Parking Lamp Taillamp Canadian Exterior Lamp Positions for Nighttime Lamps Headlamp Parking Lamp Taillamp AUTO AUTO DRL Mode DRL Mode AUTO...
Page 182: Headlamps On Reminder
Headlamps on Reminder If you open the driver’s door and turn off the ignition while leaving the lamps on, you will hear a warning chime. Headlamps Off in PARK (P) This feature works when the ignition is ON and it is dark outside.
Page 183: Daytime Running Lamps (Drl)
Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. DRL can be helpful in many different driving conditions, but they can be especially helpful in the short periods after dawn and before sunset.
Page 184: Automatic Headlamp System
Automatic Headlamp System When it is dark enough outside, your automatic headlamp system will turn on your headlamps at the normal brightness along with other lamps such as the taillamps, sidemarker, parking lamps and the instrument panel lights. The radio lights will also be dim.
Page 185: Fog Lamps
Fog Lamps If your vehicle has this feature, the button for the fog lamps is located on the instrument panel, to the left of the steering wheel. If your vehicle has fog lamps, the ignition must be on. Push the button to turn the fog lamps on. An indicator light in the button will glow when the fog lamps are on.
Page 186: Entry/Exit Lighting
Entry/Exit Lighting When you open any door, the lamps inside of your vehicle will go on. These lamps will fade out 20 seconds after the last door is closed, or when the ignition is turned on after all doors have been closed.
Page 187: Battery Run-Down Protection
Battery Run-Down Protection Your vehicle has a battery run-down protection feature designed to protect your vehicle’s battery. When any interior lamp (trunk, reading, or visor vanity) is left on while the ignition is turned off, the battery run-down protection system will automatically shut the lamp(s) off after 20 minutes.
Page 188: Cigarette Lighter
Notice: Adding any electrical equipment to your vehicle may damage it or keep other components from working as they should. The repairs would not be covered by your warranty. Do not use equipment exceeding maximum amperage rating of 20 amperes. Check with your dealer before adding electrical equipment.
Page 189: Climate Controls
Climate Controls Climate Control System With this system you can control the heating, cooling and ventilation for your vehicle. If your vehicle has the remote start feature, the climate control system will function as part of the remote start feature. See Remote Keyless Entry (RKE) System Operation on page 100.
Page 190 (Recirculation): Press the left side of the button to turn the recirculation mode on. When recirculation mode is selected, the air inside the vehicle will be recirculated through the climate control system and the vehicle, not from outside your vehicle. This mode is helpful when you are trying to limit odors from entering your vehicle and for maximum air conditioning performance in hot weather.
Page 191: Maximum Air Conditioning
Maximum Air Conditioning On hot days, open the windows to let hot inside air escape; then close them. This helps to reduce the time it takes for your vehicle to cool down. It also helps the system to operate more efficiently. For quick cool down on hot days, do the following: 1.
Page 192: Rear Window Defogger
The air-conditioning indicator light will turn off when defog is selected. If the air-conditioning button is pressed while in defog mode, the indicator light will turn on. If the button is pressed again, the light will turn off. The recirculation mode cannot be selected while in the defog mode.
Page 193: Automatic Climate Control System
If your vehicle’s speed is maintained above 50 mph (80 km/h), the rear window defogger will remain on once the button is pressed. If your vehicle has the remote start feature, the rear defogger will automatically be turned on if it is cold outside.
Page 194 Use the steps below to place the entire system in automatic mode: 1. Place the fan knob and the mode knob to AUTO. The display will now show the current set temperature. When auto is selected, the air conditioning operation and air inlet will be automatically controlled.
Page 195 If your vehicle has the remote start feature, the climate control display will initially show “AS” in place of the temperature to indicate the remote start has been activated. The system will automatically regulate the temperature according to the following: •...
Page 196 (Outside Air): Press the right side of this button to turn the outside air mode on. When this mode is selected, air from outside the vehicle will circulate throughout your vehicle. When the button is pressed, an indicator light will come on to let you know that it is activated.
Page 197 When air conditioning is selected or in AUTO mode, the system will run the air conditioning automatically to cool and dehumidify the air entering the vehicle. On hot days, open the windows to let hot inside air escape; then close them. This helps to reduce the time it takes for your vehicle to cool down.
Page 198 Rear Window Defogger The rear window defogger uses a warming grid to remove fog from the rear window. < (Rear): Press this button to turn the rear window defogger on or off. An indicator light above the button will come on to let you know that the rear window defogger is activated.
Page 199: Outlet Adjustment
Outlet Adjustment Use the thumbwheels on the air outlets, located on the center and on the sides of the instrument panel, to change the horizontal direction of the airﬂow. Use the tabs on the outlet vanes to change the vertical direction of the airﬂow.
Page 200: Warning Lights, Gages, And Indicators
Warning Lights, Gages, and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement.
Page 201 Your vehicle has this instrument panel cluster, which includes indicator warning lights and gages that are explained on the following pages. United States Base version shown, Canada and SS Model Similar...
Page 202: Speedometer And Odometer
Speedometer and Odometer Your speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). Your odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada). Your vehicle has a tamper resistant odometer.
Page 203: Safety Belt Reminder Light
Safety Belt Reminder Light When the key is turned to ON or START, a chime will come on for several seconds to remind people to fasten their safety belts, unless the driver’s safety belt is already buckled. The safety belt light will also come on and stay on for several seconds, then it will ﬂash for...
Page 204: Airbag Readiness Light
Airbag Readiness Light There is an airbag readiness light on the instrument panel cluster, which shows the airbag symbol. The system checks the airbag’s electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the airbag sensor, the pretensioners, the airbag modules, the wiring and the crash sensing and diagnostic module.
Page 205: Passenger Airbag Status Indicator
Passenger Airbag Status Indicator Your vehicle has the passenger sensing system. Your instrument panel has a passenger airbag status indicator. United States When the ignition key is turned to ON or START, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check.
Page 206 A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION: Even though the passenger sensing system is designed to turn off the passenger’s frontal airbag if the system detects a rear-facing child restraint, no system is fail-safe, and no one can...
Page 207: Charging System Light
Charging System Light The charging system light will come on for a few seconds when you turn on the ignition as a check to indicate it is working. If the light stays on, or comes on while you are driving and you hear a chime, there could be a problem with the electrical charging system.
Page 208: Anti-Lock Brake System
When the ignition is on, the brake system warning light will also come on when you set your parking brake. The light will stay on if your parking brake does not release fully. If it stays on after your parking brake is fully released, it means you have a brake problem.
Page 209: Traction Control System (Tcs)
If the light stays on, turn the ignition to off. If the light comes on and the chime sounds when you are driving, stop as soon as possible and turn the ignition off. Then start the engine again to reset the system.
Page 210: Active Light
Traction Control System Active Light If your vehicle has the Traction Control System (TCS), this light will come on when the system is limiting wheel spin. Slippery road conditions may exist if the TCS active light comes on, so adjust your driving accordingly.
Page 211: Enhanced Traction System
Enhanced Traction System Active Light If your vehicle has the Enhanced Traction System (ETS), this light will come on when the system is limiting wheel spin. Slippery road conditions may exist if the Enhanced Traction System active light comes on, so adjust your driving accordingly.
Page 212: Engine Coolant Temperature Gage
Engine Coolant Temperature Gage United States This gage shows the engine coolant temperature. If the gage pointer moves into the red area, the light comes on and you hear a chime, your engine is too hot! It means that your engine coolant has overheated.
Page 213 Notice: If you keep driving your vehicle with this light on, after awhile, your emission controls may not work as well, your fuel economy may not be as good, and your engine may not run as smoothly. This could lead to costly repairs that may not be covered by your warranty.
Page 214: If The Light Is Flashing
If the Light is Flashing The following may prevent more serious damage to your vehicle: • Reducing vehicle speed • Avoiding hard accelerations • Avoiding steep uphill grades • If you are towing a trailer, reduce the amount of cargo being hauled as soon as it is possible If the light stops ﬂashing and remains on steady, see “If the Light Is On Steady”...
Page 215 Have you recently changed brands of fuel? If so, be sure to fuel your vehicle with quality fuel. See Gasoline Octane on page 344. Poor fuel quality will cause your engine not to run as efficiently as designed. You may notice this as stalling after start-up, stalling when you put the vehicle into gear, misﬁring, hesitation on acceleration, or stumbling on acceleration.
Page 216: Oil Pressure Light
Oil Pressure Light If your vehicle has low engine oil pressure, this light will stay on after you start your engine, or come on and you will hear a chime when you are driving. This indicates that your engine is not receiving enough oil.
Page 217: Security Light
Security Light For information regarding this light, see Theft-Deterrent Systems on page 116. Cruise Control Light This light comes on whenever you set the cruise control. The light goes out when the cruise control is turned off. See Cruise Control on page 176 for more information.
Page 218: Fuel Gage
Fuel Gage United States Your fuel gage tells you about how much fuel you have left, when the ignition is on. When the indicator nears empty, this light, located left of the pump symbol, will come on and you will hear a chime.
Page 219: Driver Information Center (Dic)
Driver Information Center (DIC) The Driver Information Center (DIC) provides the following: • A way to personalize your vehicle • Trip information • Warning messages United States The buttons used to activate the DIC are located on the left side of the vehicle’s audio system. INFO/ (Information): Press this button to scroll through the vehicle information mode displays.
Page 220: Information Mode
Information Mode INFO/ (Information): Press this button to scroll through the vehicle information mode displays in the following order: • TRIP A • TRIP B • FUEL RANGE (Fuel Range Until Empty) • ECON (Average Fuel Economy) • AV SPEED (Average Vehicle Speed) •...
Page 221 OIL LIFE: Press the information button until OIL LIFE is displayed. The engine oil life system shows an estimate of the oil’s remaining useful life. It shows 100% when the system is reset after an oil change. It will alert you to change the oil on a schedule consistent with your driving conditions.
Page 222: Dic Warnings And Messages
When the desired option is reached, press the enter button to toggle between the modes of that option. To make a selection, press the MENU button again. If no selection is made within 10 seconds, the display reverts back to the previous information displayed.
Page 223 CHANGE OIL SOON: This message displays when the life of the engine oil has expired and it should be changed. When you acknowledge the CHANGE OIL SOON message by clearing it from the display, you still must reset the engine oil life system separately. See Engine Oil Life System on page 360, Engine Oil on page 357, and Scheduled Maintenance on page 460 for more information.
Page 224 KEY FOB BATT (Battery) LOW: This message displays if the Remote Keyless Entry (RKE) transmitter battery is low. Replace the battery in the transmitter. See “Battery Replacement” under Remote Keyless Entry (RKE) System Operation on page 100. LOW FUEL: This message displays along with a low fuel warning light on the instrument panel cluster when your vehicle is low on fuel.
Page 225: Dic Vehicle Personalization
DIC Vehicle Personalization The following personalization options may appear on your vehicle’s audio display by pressing the MENU button: OIL LIFE RESET: When this option is displayed, you can reset the engine oil life system. To reset the system, see Engine Oil Life System on page 360.
Page 226 LIGHT FLASH: If your vehicle has Remote Keyless Entry (RKE), this option which allows the vehicle’s exterior perimeter lighting to ﬂash every time the lock, unlock, or trunk release buttons on the RKE transmitter are pressed, can be enabled or disabled.
Page 227: Audio System(S)
LANGUAGE: To select your choice of language, press the enter button to move between the optional languages. The languages are ENGLISH, FRENCH, SPANISH, and GERMAN. Choosing a language will display all of the information on the DIC in the desired language. When you have made your choice, press the MENU button for at least one second to record your selection.
Page 228: Setting The Time For Radios Without Radio
While your vehicle is parked: • Familiarize yourself with all of its controls. • Familiarize yourself with its operation. • Set up your audio system by presetting your favorite radio stations, setting the tone, and adjusting the speakers. Then, when driving conditions permit, you can tune to your favorite radio stations using the presets and steering wheel controls if the vehicle has them.
Page 229: Setting The Time For Radios With Radio
Setting the Time for Radios with Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol appears on the display and the hour number ﬂashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again.
Page 230 DISP (Display): Press this knob to switch the display between the time and the temperature or the radio station frequency and the temperature. When the ignition is off, press this knob to display the time. To change the default on the display, press the DISP knob until the desired option displays, then hold the knob for two seconds.
Page 231: Adjusting The Speakers (Balance/Fade
Setting the Tone (Bass/Treble) TONE / (Bass/Treble): To adjust the bass or the treble, press and release the tone button until BASS or TREB (treble) displays. Turn the ADJ (adjust) knob to increase or to decrease the tone. If a station is weak or has static, decrease the treble.
Page 232: Radio Messages
Radio Messages CALIBRATE: The audio system has been calibrated for your vehicle from the factory. If CALIBRATE displays, it means that the radio has not been conﬁgured properly for your vehicle and must be returned to your dealer for service. LOCKED: This message displays when the ®...
Page 233 Do not add any label to a CD, it could get caught in the CD player. If a CD is recorded on a personal computer and a description label is needed, try labeling the top of the recorded CD with a marking pen. Notice: If you add any label to a CD, insert more than one CD into the slot at a time, or attempt to play scratched or damaged CDs, you...
Page 234 SEEK : Press this button to go to the start of the current track if more than eight seconds have played. The track number displays. If this button is pressed more than once, the player continues moving backward through the CD. If this button is held for more than two seconds, the CD enters CD scan mode and the CD plays the ﬁrst 10 seconds of each track.
Page 235: Radio With Cd (Uplevel)
Radio with CD (Uplevel) United States shown, Canada similar Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: •...
Page 236 XM™ Satellite Radio Service XM™ is a satellite radio service that is based in the 48 contiguous United States and Canada. XM™ offers a large variety of coast-to-coast channels including music, news, sports, talk, traffic/weather (U.S. subscribers), and children’s programming. XM™...
Page 237: Finding A Station
AUTO (Automatic Volume): With automatic volume, the audio system adjusts automatically to make up for road and wind noise as you drive. Set the volume at the desired level. Press this button to select LOW, MEDIUM, or HIGH. AUTO VOL LOW (automatic volume low), AUTO VOL MEDIUM (automatic volume medium), or AUTO VOL HIGH (automatic volume high) displays.
Page 238: Setting Preset Stations
Setting Preset Stations Up to 30 stations (six FM1, six FM2, and six AM, six XM1 and six XM2 (if equipped)), can be programmed on the six numbered pushbuttons, by performing the following steps: 1. Turn the radio on. 2. Press BAND to select FM1, FM2, AM, or XM1 or XM2.
Page 239: Rds And Xm
Adjusting the Speakers (Balance/Fade) BAL/FADE / (Balance/Fade): To adjust the balance between the right and the left speakers, push and release the balance and fade button until BAL displays. Turn the ADJ knob to move the sound toward the right or the left speakers. To adjust the fade between the front and the rear speakers, push and release the balance and fade button until FADE displays.
Page 240 BAND (Alternate Frequency): Alternate frequency lets the radio switch to a stronger station with the same program type. To turn alternate frequency on, press and hold BAND for two seconds. FM ALT FREQ ON and AF displays. The radio can switch to stations with a stronger frequency.
Page 241 If no station is found that broadcasts traffic announcements, NO TRAFFIC INFO displays. If TRAF is on the display, press the TRAF button to turn off the traffic announcements. The radio plays the traffic announcement even if the volume is low. The radio interrupts the play of a CD if the last tuned station broadcasts traffic announcements.
Page 242 If these problems occur, check the bottom surface of the CD. If the surface of the CD is damaged, such as cracked, broken, or scratched, the CD will not play properly. If the surface of the CD is soiled, see Care of Your CDs and DVDs on page 284 for more information.
Page 243 SEEK : Press the down arrow to go to the start of the current track if more than eight seconds have played. If this arrow is pressed more than once, the player continues moving backward through the CD. Press the up arrow to go to the start of the next track.
Page 244: Radio With Six-Disc Cd
CD Messages CHECK CD: If this message displays and/or the CD ejects, it could be for one of the following reasons: • It is very hot. When the temperature returns to normal, the CD should play. • You are driving on a very rough road. When the road becomes smoother, the CD should play.
Page 245 Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming •...
Page 246: Playing The Radio
Playing the Radio (Power): Press this knob to turn the system on and off. (Volume): Turn this knob clockwise or counterclockwise to increase or to decrease the volume. DISP (Display): Press this knob to switch the display between time and temperature or radio station frequency and temperature.
Page 247 Finding a Station BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (if equipped). The selection displays. ADJ (Adjust): Turn this knob to select radio stations. SEEK : Press the down or up arrow to go to the next or to the previous station and stay there.
Page 248 Setting the Tone (Bass/Midrange/Treble) TONE / (Bass/Treble): Press and release this button until BASS, MID (midrange), or TREB (treble) displays. Turn the ADJ knob to increase or to decrease the tone. The display shows the bass, mid, or treble level. If a station is weak or has static, decrease the treble.
Page 249 Adjusting the Speakers (Balance/Fade) BAL/FADE / (Balance/Fade): To adjust the balance between the right and the left speakers, push and release the balance and fade button until BAL (balance) displays. Turn the ADJ (adjust) knob to move the sound toward the right or the left speakers.
Page 250: Rds Messages
BAND (Alternate Frequency): Alternate frequency allows the radio to switch to a stronger station with the same program type. To turn alternate frequency on, press and hold BAND for two seconds. FM ALT FREQ ON and AF displays. The radio can switch to stations with a stronger frequency.
Page 251 When a traffic announcement comes on the tuned radio station you will hear it. If no station is found that broadcasts traffic announcements, NO TRAFFIC INFO displays. If TRAF displays, press and hold the MSG button for two seconds to turn off the traffic announcements.
Page 252 If the surface of the CD is soiled, see Care of Your CDs and DVDs on page 284 for more information. If there is no apparent damage, try a known good CD. Do not add any label to a CD, it could get caught in the CD player.
Page 253 If more than one CD has been loaded, a number for each CD displays and the currently selected slot number is underlined. EJECT/ : To eject a single CD press this button. The radio displays EJECTING CD # and the single CD symbol ﬂashes until the CD is ready to be removed.
Page 254 RPT (Repeat): With the repeat setting, one track or an entire CD can be repeated. To use repeat, do the following: • To repeat the track you are listening to, press and release the RPT button. REPEAT ON and RPT displays. Press RPT again to turn off repeat play.
Page 255 DISP (Display): Press this knob to switch between time, temperature, and the elapsed time of the track. To change the default display (CD#/Track#/ Time, CD#/Track#/Temperature, or Track#/Elapsed Time/Temperature), press the knob until the desired option displayed, then hold the knob for two seconds.
Page 256 SONG LIST FULL displays if you try to save more than 20 selections. To play the song list, press the song list button. One beep sounds and SONG LIST displays. The recorded tracks begin to play in the order that they were saved. Seek through the song list by using the SEEK arrows.
Page 257 CD Messages CHECK CD: If this message displays and/or the CD ejects, it could be for one of the following reasons: • It is very hot. When the temperature returns to normal, the CD should play. • You are driving on a very rough road. When the road becomes smoother, the CD should play.
Page 258: Xm Radio Messages
XM Radio Messages Radio Display Message XL (Explicit Language XL on the radio display, Channels) after the channel name, indicates content with explicit language. Updating Updating encryption code The encryption code in the receiver is being updated, and No Signal Loss of signal Loading XM Acquiring channel audio...
Page 259 Radio Display Message No Info Category Name not available No Info No Text/Informational message available Not Found No channel available for the chosen category XM Locked Theft lock active Radio ID Radio ID label (channel 0) If tuned to channel 0, this message alternates with the Unknown Radio ID not known (should only be if...
Page 260: Rear Seat Entertainment System
Rear Seat Entertainment System Your vehicle may have a DVD Rear Seat Entertainment (RSE) system. The RSE system includes a DVD player, a video display screen, two sets of wireless headphones, and a remote control. This system also functions as a rear seat audio (RSA) system.
Page 261 Notice: Do not store the headphones in heat or direct sunlight. This could damage the headphones and repairs will not be covered by your warranty. Keep the headphones stored in a cool, dry place. MAXX vehicles with the RSE system may have a rear seat storage compartment.
Page 262: Stereo Rca Jacks
Stereo RCA Jacks The RCA jacks are located on the DVD faceplate on the ﬂoor console. The RCA jacks allow audio and video signals to be connected from an auxiliary device such as a camcorder or a video game unit to the RSE system.
Page 263 To turn the vehicles rear speakers on and off, press the power button on the RSE system or on the remote control. When the rear speakers are off, the audio from the RSE system can be heard through both the wireless headphones and the vehicles front speakers at the same time.
Page 264: Dvd Player
DVD Player The DVD player is located on the end of the ﬂoor console under the video screen. The DVD player can be controlled by the buttons on the RSE system and/or by the buttons on the remote control. See “Remote Control” later in this section for more information.
Page 265 1–6 (Preset Pushbuttons): This button is inactive when in DVD mode. BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (if equipped). If the front seat passengers are listening to the DVD player, the rear seat passengers cannot select XM1 or XM2.
Page 266: Remote Control
Stopping and Resuming Playback To stop playing a disc, press and release the stop button on the DVD player faceplate or the remote control. To resume playback, press the play/pause button on the DVD player faceplate or the remote control. The movie should resume play from where it was last stopped if the disc has not been ejected or the stop button has not been pressed twice on the...
Page 267 Remote Control Buttons (Power): Press this button to turn the DVD player on and off. (Eject): Press this button to eject or to load the disc. (Backlight): Press this button to turn the remote control backlight on. The backlight will time out after about eight seconds.
Page 268 (Fast Forward): Press this button to fast forward the DVD or CD. To stop fast forwarding, press this button again. This button may not work when the DVD is playing the copyright information or the previews. (Play/Pause): Press this button to start play of a DVD or CD.
Page 269 (Audio Compression): DVDs have a wide dynamic audio range. Audio compression may be used to reduce the difference between soft and loud selections of the DVD. Press this button to switch the audio compression on and off. AUX (Auxiliary): Press this button to switch the system between the DVD player and an auxiliary source.
Page 270 Language Preferences The USER PREFERENCE SETTINGS menu allows the default language preferences to be modiﬁed. Use the remote control up and down arrow buttons to select. The movie may stop while selections are being made. Audio Language: The default DVD playback audio language may be selected from various languages.
Page 271 Menu Bar The menu bar can be displayed across the top of the screen by pressing the DISPLAY button on the remote control. Selecting icons from the menu bar allows adjustments to the audio and video settings. Use the remote control left and right arrow buttons to scroll through the menu bar.
Page 272 Title: Move between DVD titles by using the remote control arrow buttons. Chapter: Move between DVD chapters by using the remote control arrow buttons. Time Search: The user can jump to different areas of a DVD by using the remote control arrow and enter buttons to select a speciﬁc time position.
Page 273 Tips and Troubleshooting Chart Problem Recommended Action No power. The ignition may not be in the on position, ACC, or RAP. The parental control button might have been pressed. Disc will not play. The system might be off. The parental control button might have been pressed.
Page 274 Problem Recommended Action The language in the audio Press the main display or on the screen is wrong. menu button on the DVD player or the remote control and change the audio or language selection on the DVD menu. The remote control does Point the remote control not work.
Page 275 Problem Recommended Action When I return to the DVD If the stop button was from the system menu, pressed once, it resumes sometimes it plays from play from where it left off. the beginning and If the stop button was sometimes from where it pressed twice, it will start left off.
Page 276: Dvd Messages
Problem Recommended Action DVD System inoperable. In severe or extreme temperatures your DVD system might not be operable. Temperatures below 4°F ( 20°C) or above 158°F (70°C) could damage the DVD system. Operate the DVD system under normal or comfortable cabin temperature ranges.
Page 277: Rear Seat Audio (Rsa) (Without Entertainment System)
DVD Distortion There may be an experience with video distortion when operating cellular phones, scanners, CB radios, Global Position Systems (GPS)*, two-way radios, mobile fax, or walkie talkies. It may be necessary to turn off the DVD player when operating one of these devices in or near the vehicle.
Page 278 The front seat audio controls always have priority over the RSA controls. If the front seat passengers switch to the same source as the RSA, the RSA will no longer control the source. You can operate the RSA when the main radio is off.
Page 279: Rear Seat Audio (Rsa) (With Entertainment System)
BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (if equipped). 1–6 (Preset): Press this button to go to the next preset radio station. This function is inactive if the front seat passengers are listening to the radio. When a cassette tape is playing, press this button to go to the other side of the tape.
Page 280 (Power): Press this button to turn the RSE system on and off. The rear speakers will be muted when the RSA power is turned on. 1–6 (Preset): Press this button to go to the next preset radio station set on the pushbuttons on the main radio.
Page 281: Theft-Deterrent Feature
(Volume): Press the up or down arrow to increase or decrease the volume on the wired headphones (not included). The arrows on the right are for the right headphones and the arrows on the left are for the left headphones. Theft-Deterrent Feature ®...
Page 282: Audio Steering Wheel Controls (Four Spoke)
To scan the current CD, press and hold either up or down arrow for more than two seconds. The CD will go to the next track, play the ﬁrst 10 seconds, then go on to the next track. Press either up or down arrow again to stop scanning.
Page 283: Radio Reception
When a CD is playing, press the up or the down arrow to go to the next or previous track. > (Mute): Press this button to silence the system. Press this button again, or any other radio button, to turn the sound on. BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (if equipped).
Page 284: Care Of Your Cds And Dvds
XM™ Satellite Radio Service XM™ Satellite Radio Service gives digital radio reception from coast-to-coast in the 48 contiguous United States, and in Canada. Just as with FM, tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In addition, traveling or standing under heavy foliage, bridges, garages, or tunnels can cause loss of the XM™...
Page 285: Backglass Antenna (Sedan Only)
Backglass Antenna (Sedan Only) The AM-FM antenna is integrated with the rear window defogger, located in the rear window. Make sure that the inside surface of the rear window is not scratched and that the grid lines on the glass are not damaged. If the inside surface is damaged, it could interfere with radio reception.
Page 286 NOTES...
Page 287: Driving Your Vehicle
Section 4 Your Driving, the Road, and Your Vehicle ... 288 Defensive Driving ... 288 Drunken Driving ... 289 Control of a Vehicle ... 292 Braking ... 292 Anti-Lock Brake System (ABS) ... 293 Braking in Emergencies ... 295 Traction Control System (TCS) ... 296 Enhanced Traction System (ETS) ...
Page 288: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and Your Vehicle Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. See Safety Belts: They Are for Everyone on page 20. CAUTION: Defensive driving really means “Be ready for anything.”...
Page 289: Drunken Driving
Drunken Driving Death and injury associated with drinking and driving is a national tragedy. It is the number one contributor to the highway death toll, claiming thousands of victims every year. Alcohol affects four things that anyone needs to drive a vehicle: •...
Page 290 According to the American Medical Association, a 180 lb (82 kg) person who drinks three 12 ounce (355 ml) bottles of beer in an hour will end up with a BAC of about 0.06 percent. The person would reach the same BAC by drinking three 4 ounce (120 ml) glasses of wine or three mixed drinks if each had 1-1/2 ounces (45 ml) of liquors like whiskey, gin, or vodka.
Page 291 But the ability to drive is affected well below a BAC of 0.10 percent. Research shows that the driving skills of many people are impaired at a BAC approaching 0.05 percent, and that the effects are worse at night. All drivers are impaired at BAC levels above 0.05 percent.
Page 292: Control Of A Vehicle
Control of a Vehicle You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering, and the accelerator. All three systems have to do their work at the places where the tires meet the road. Sometimes, as when you are driving on snow or ice, it is easy to ask more of those control systems than the tires and road can provide.
Page 293: Anti-Lock Brake System (Abs)
Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is a mistake. The brakes may not have time to cool between hard stops. The brakes will wear out much faster if you do a lot of heavy braking.
Page 294 Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here is what happens with ABS: A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each wheel.
Page 295: Braking In Emergencies
Remember: ABS does not change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you will not have time to apply your brakes if that vehicle suddenly slows or stops.
Page 296: Traction Control System (Tcs)
Traction Control System (TCS) Your vehicle may have a Traction Control System (TCS) that limits wheel spin. This is especially useful in slippery road conditions. The system operates only if it senses that one or both of the front wheels are spinning or beginning to lose traction.
Page 297: Enhanced Traction System (Ets)
To limit wheel spin, especially in slippery road conditions, you should always leave the Traction Control System on. But you can turn the system off if you prefer. To turn the system on or off, press the TC button located under the climate controls. In order to effectively “rock”...
Page 298 The Enhanced Traction System operates in all transaxle shift lever positions. But the system can upshift the transaxle only as high as the shift lever position you’ve chosen, so you should use the lower gears only when necessary. When the system is on, this warning light will come on to let you know there’s a problem.
Page 299: Steering
Steering Electric Power Steering If your vehicle has the electric power steering system and the engine stalls while you are driving, the power steering assist system will continue to operate until you are able to stop your vehicle. If you lose power steering assist because the electric power steering system is not functioning, you can steer, but it will take more effort.
Page 300 The traction you can get in a curve depends on the condition of your tires and the road surface, the angle at which the curve is banked, and your speed. While you are in a curve, speed is the one factor you can control. Suppose you are steering through a sharp curve.
Page 301: Steering In Emergencies
Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and ﬁnd a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
Page 302: Off-Road Recovery
Off-Road Recovery You may ﬁnd that your right wheels have dropped off the edge of a road onto the shoulder while you are driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, steer so that your vehicle straddles the edge of the pavement.
Page 303 • Watch for traffic signs, pavement markings, and lines. If you can see a sign up ahead that might indicate a turn or an intersection, delay your pass. A broken center line usually indicates it is all right to pass, providing the road ahead is clear.
Page 304: Loss Of Control
Loss of Control Let us review what driving experts say about what happens when the three control systems — brakes, steering, and acceleration — do not have enough friction where the tires meet the road to do what the driver has asked. In any emergency, do not give up.
Page 305: Competitive Driving
While driving on a surface with reduced traction, try your best to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear. Any sudden changes could cause the tires to slide. You may not realize the surface is slippery until your vehicle is skidding.
Page 306: Driving At Night
Driving at Night Night driving is more dangerous than day driving. One reason is that some drivers are likely to be impaired — by alcohol or drugs, with night vision problems, or by fatigue. Here are some tips on night driving. •...
Page 307: Driving In Rain And On Wet Roads
Keep the windshield and all the glass on your vehicle clean — inside and out. Glare at night is made much worse by dirt on the glass. Even the inside of the glass can build up a ﬁlm caused by dust. Dirty glass makes lights dazzle and ﬂash more than clean glass would, making the pupils of your eyes contract repeatedly.
Page 308 The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good shape, a heavy rain can make it harder to see road signs and traffic signals, pavement markings, the edge of the road, and even people walking. It is wise to keep your windshield wiping equipment in good shape and keep your windshield washer ﬂuid reservoir ﬁlled with washer ﬂuid.
Page 309 Driving Through Deep Standing Water Notice: If you drive too quickly through deep puddles or standing water, water can come in through your engine’s air intake and badly damage your engine. Never drive through water that is slightly lower than the underbody of your vehicle.
Page 310: City Driving
City Driving One of the biggest problems with city streets is the amount of traffic on them. You will want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: •...
Page 311: Freeway Driving
Freeway Driving Mile for mile, freeways — also called thruways, parkways, expressways, turnpikes, or superhighways — are the safest of all roads. But they have their own special rules. The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving.
Page 312: Before Leaving On A Long Trip
Before changing lanes, check your mirrors. Then use your turn signal. Just before you leave the lane, glance quickly over your shoulder to make sure there is not another vehicle in your blind spot. Once you are moving on the freeway, make certain you allow a reasonable following distance.
Page 313: Highway Hypnosis
• Tires: They are vitally important to a safe, trouble-free trip. Is the tread good enough for long-distance driving? Are the tires all inﬂated to the recommended pressure? • Weather Forecasts: What is the weather outlook along your route? Should you delay your trip a short time to avoid a major storm system? •...
Page 314: Hill And Mountain Roads
Hill and Mountain Roads Driving on steep hills or mountains is different from driving in ﬂat or rolling terrain. If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. •...
Page 315 CAUTION: Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous. Your brakes will have to do all the work of slowing down. They could get so hot that they would not work well. You would then have poor braking or even none going down a hill.
Page 316: Winter Driving
Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You may want to put winter emergency supplies in your trunk. Also see Tires on page 398. Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth, and a couple of reﬂective warning...
Page 317 Driving on Snow or Ice Most of the time, those places where the tires meet the road probably have good traction. However, if there is snow or ice between the tires and the road, you can have a very slippery situation.
Page 318: If You Are Caught In A Blizzard
Remember, unless you have ABS, if you brake so hard that your wheels stop rolling, you will just slide. Brake so your wheels always keep rolling and you can still steer. • Whatever your braking system, allow greater following distance on any slippery road. •...
Page 319 You can run the engine to keep warm, but be careful. CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle.
Page 320: If Your Vehicle Is Stuck In Sand
You will need a well-charged battery to restart the vehicle, and possibly for signaling later on with your headlamps. Let the heater run for a while. Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again and repeat this only when you feel really uncomfortable from the cold.
Page 321: Rocking Your Vehicle To Get It Out
CAUTION: If you let your vehicle’s tires spin at high speed, they can explode, and you or others could be injured. And, the transaxle or other parts of the vehicle can overheat. That could cause an engine compartment ﬁre or other damage. When you are stuck, spin the wheels as little as possible.
Page 322: Loading Your Vehicle
Loading Your Vehicle It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo and all nonfactory-installed options. Two labels on your vehicle show how much weight it may properly carry, the Tire and Loading Information label and the Certiﬁcation label.
Page 323 The Tire and Loading Information label shows the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds. The Tire and Loading Information label also shows the tire size of the original equipment tires (C) and the recommended cold tire inﬂation pressures (D).
Page 324 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, the load from your trailer will be transferred to your vehicle.
Page 325 Example 2 Item Description Vehicle Capacity Weight for Example 2 Subtract Occupant Weight 150 lbs (68 kg) Available Cargo Weight Total Item 1,000 lbs (453 kg) 750 lbs (340 kg) 250 lbs (113 kg) Refer to your vehicle’s Tire and Loading Information label for speciﬁc information about your vehicle’s capacity weight and seating positions.
Page 326 Certiﬁcation Label A vehicle speciﬁc Certiﬁcation label, found on the rear edge of the driver’s door, tells you the gross weight capacity of your vehicle, called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo.
Page 327 If you put things inside your vehicle — like suitcases, tools, packages, or anything else — they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep going.
Page 328: Towing
Towing Towing Your Vehicle Consult your dealer or a professional towing service if you need to have your disabled vehicle towed. See Roadside Assistance Program on page 484. If you want to tow your vehicle behind another vehicle for recreational purposes (such as behind a motorhome), see “Recreational Vehicle Towing”...
Page 329 Dinghy Towing The Malibu Sedan SS and Maxx SS cannot be dinghy towed. For vehicles that can be dinghy towed, follow these steps: 1. Position the vehicle to tow and then secure it. 2. Turn the ignition switch to OFF. 3.
Page 330 Notice: Towing your vehicle from the rear could damage it. Also, repairs would not be covered by the warranty. Never have your vehicle towed from the rear. Dolly Towing To tow your vehicle with a dolly and two wheels on the ground, follow these steps: 1.
Page 331: Towing A Trailer
Towing a Trailer CAUTION: If you do not use the correct equipment and drive properly, you can lose control when you pull a trailer. For example, if the trailer is too heavy, the brakes may not work well — or even at all. You and your passengers could be seriously injured.
Page 332 If You Do Decide To Pull A Trailer If you do, here are some important points: • There are many different laws, including speed limit restrictions, having to do with trailering. Make sure your rig will be legal, not only where you live but also where you’ll be driving.
Page 333 45 mph (72 km/h) to avoid overheating the engine cooling system. You can ask your dealer for our trailering information or advice, or you can write us at: Chevrolet Customer Assistance P.O. Box 33170 Detroit, MI 48232-5170 In Canada, write to:...
Page 334 Total Weight on Your Vehicle’s Tires Be sure your vehicle’s tires are inﬂated to the upper limit for cold tires. You’ll ﬁnd these numbers on the Tire and Loading Information label. See Loading Your Vehicle on page 322. Then be sure you don’t go over the GVW limit for your vehicle, including the weight of the trailer tongue.
Page 335 Driving with a Trailer Towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now a good deal longer and not nearly as responsive as your vehicle is by itself.
Page 336 Making Turns Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. Your vehicle could be damaged. Avoid making very sharp turns while trailering. When you’re turning with a trailer, make wider turns than normal.
Page 337 Parking on Hills CAUTION: You really should not park your vehicle, with a trailer attached, on a hill. If something goes wrong, your rig could start to move. People can be injured, and both your vehicle and the trailer can be damaged.
Page 338 When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down while you: • start your engine, • shift into a gear, and • release the parking brake. 2. Let up on the brake pedal. 3.
Page 339: Service And Appearance Care
Section 5 Service ... 342 Accessories and Modiﬁcations ... 342 California Proposition 65 Warning ... 343 Doing Your Own Service Work ... 343 Adding Equipment to the Outside of Your Vehicle ... 344 Fuel ... 344 Gasoline Octane ... 344 Gasoline Speciﬁcations ...
Page 340 Section 5 Windshield Wiper Blade Replacement ... 395 Tires ... 398 Winter Tires ... 399 Tire Sidewall Labeling ... 400 Tire Terminology and Deﬁnitions ... 404 Inﬂation - Tire Pressure ... 407 High-Speed Operation ... 408 Tire Inspection and Rotation ... 409 When It Is Time for New Tires ...
Page 341 Section 5 Underbody Maintenance ... 443 Chemical Paint Spotting ... 444 Vehicle Identiﬁcation ... 445 Vehicle Identiﬁcation Number (VIN) ... 445 Service Parts Identiﬁcation Label ... 446 Electrical System ... 446 Add-On Electrical Equipment ... 446 Headlamp Wiring ... 446 Service and Appearance Care Windshield Wiper Fuses ...
Page 342: Service
Service Your dealer knows your vehicle best and wants you to be happy with it. We hope you will go to your dealer for all your service needs. You will get genuine GM parts and GM-trained and supported service people. We hope you will want to keep your GM vehicle all GM.
Page 343: California Proposition 65 Warning
California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems (including some inside the vehicle), many ﬂuids, and some component wear by-products contain and/or emit these chemicals.
Page 344: Adding Equipment To The Outside Of
Your vehicle has an airbag system. Before attempting to do your own service work, see Servicing Your Airbag-Equipped Vehicle on page 90. You should keep a record with all parts receipts and list the mileage and the date of any service work you perform.
Page 345: Gasoline Speciﬁcations
Gasoline Speciﬁcations At a minimum, gasoline should meet ASTM speciﬁcation D 4814 in the United States or CAN/CGSB-3.5 in Canada. Some gasolines may contain an octane-enhancing additive called methylcyclopentadienyl manganese tricarbonyl (MMT). General Motors recommends against the use of gasolines containing MMT. See Additives on page 345 for additional information.
Page 346: Fuels In Foreign Countries
Gasolines containing oxygenates, such as ethers and ethanol, and reformulated gasolines may be available in your area. General Motors recommends that you use these gasolines if they comply with the speciﬁcations described earlier. However, E85 (85% ethanol) and other fuels containing more than 10% ethanol must not be used in vehicles that were not designed for those fuels.
Page 347: Filling The Tank
Filling the Tank CAUTION: Fuel vapor burns violently and a fuel ﬁre can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling.
Page 348 CAUTION: If you spill fuel and then something ignites it, you could be badly burned. Fuel can spray out on you if you open the fuel cap too quickly. This spray can happen if your tank is nearly full, and is more likely in hot weather.
Page 349: Filling A Portable Fuel Container
Filling a Portable Fuel Container CAUTION: Never ﬁll a portable fuel container while it is in your vehicle. Static electricity discharge from the container can ignite the gasoline vapor. You can be badly burned and your vehicle damaged if this occurs. CAUTION: (Continued) CAUTION: (Continued) To help avoid injury to you and others:...
Page 350: Checking Things Under
Checking Things Under the Hood CAUTION: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. CAUTION: Things that burn can get on hot engine parts and start a ﬁre.
Page 351 2. Then go to the front of the vehicle and push the secondary hood release handle toward the driver’s side of the vehicle. 3. Lift the hood. 4. Release the hood prop rod from its retainer and put the hood prop into the slot marked with an arrow.
Page 352: Engine Compartment Overview
Engine Compartment Overview When you open the hood on the 2.2L L4 engine, here is what you will see:...
Page 353 A. Engine Air Cleaner/Filter. See Engine Air Cleaner/Filter on page 362. B. Engine Oil Dipstick. See “Checking Engine Oil” under Engine Oil on page 357. C. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 357. D.
Page 354 When you open the hood on the 3.5L V6 engine, here is what you will see:...
Page 355 A. Engine Air Cleaner/Filter. See Engine Air Cleaner/Filter on page 362. B. Power Steering Fluid Reservoir (If Equipped). See Power Steering Fluid on page 378 C. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 357. D.
Page 356 When you open the hood on the 3.9L V6 engine, here is what you will see:...
Page 357: Engine Oil
A. Engine Air Cleaner/Filter. See Engine Air Cleaner/Filter on page 362. B. Engine Coolant Bleed Valve. See Cooling System on page 373 C. Power Steering Fluid. See Power Steering Fluid on page 378. D. Automatic Transaxle Fluid Dipstick (Out of View).
Page 358 When to Add Engine Oil L4 Engine V6 Engine If the oil is below the MIN mark for the L4 engine or below the cross-hatched area at the tip of the dipstick for the V6 engine, you will need to add at least one quart/liter of oil.
Page 359 What Kind of Engine Oil to Use Look for two things: • GM6094M Your vehicle’s engine requires oil meeting GM Standard GM6094M. You should look for and use only an oil that meets GM Standard GM6094M. • SAE 5W-30 As shown in the viscosity chart, SAE 5W-30 is best for your vehicle.
Page 360: Engine Oil Life System
You should look for this information on the oil container, and use only those oils that are identiﬁed as meeting GM Standard GM6094M and have the starburst symbol on the front of the oil container. Notice: Use only engine oil identiﬁed as meeting GM Standard GM6094M and showing the American Petroleum Institute Certiﬁed For Gasoline Engines starburst symbol.
Page 361 If the system is ever reset accidentally, you must change the oil at 3,000 miles (5 000 km) since your last oil change. Remember to reset the oil life system whenever the oil is changed. How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change the engine oil and ﬁlter based on vehicle...
Page 362: Engine Air Cleaner/Filter
Engine Air Cleaner/Filter See Engine Compartment Overview on page 352 for the location of the engine air cleaner/ﬁlter. When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/ﬁlter at the Maintenance II intervals and replace it at the ﬁrst oil change after each 50,000 mile (83 000 km) interval.
Page 363: Automatic Transaxle Fluid
CAUTION: Operating the engine with the air cleaner/ ﬁlter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop ﬂames if the engine backﬁres. If it is not there and the engine backﬁres, you could be burned.
Page 364: Automatic Transaxle Fluid
Automatic Transaxle Fluid (3.9L V6 Engine) When to Check and Change Automatic Transaxle Fluid A good time to check the automatic transaxle ﬂuid level is when the engine oil is changed. Change the ﬂuid and ﬁlter at the intervals listed in Additional Required Services on page 463, and be sure to use the transaxle ﬂuid listed in Recommended Fluids and Lubricants on page 469.
Page 365 Checking the Fluid Level Prepare the vehicle as follows: 1. Park the vehicle on a level place. Keep the engine running. 2. With the parking brake applied, place the shift lever in PARK (P). 3. With your foot on the brake pedal, move the shift lever through each gear, pausing for about three seconds in each one.
Page 366 3. Check both sides of the dipstick, and read the lower level. The ﬂuid level must be in the crosshatched area. 4. If the ﬂuid level is in the acceptable range, push the dipstick back in all the way. How to Add Automatic Transaxle Fluid Refer to the Maintenance Schedule to determine what kind of transaxle ﬂuid to use.
Page 367: Engine Coolant
3. After adding ﬂuid, recheck the ﬂuid level as described under “How to Check Automatic Transaxle Fluid,” earlier in this section. 4. When the correct ﬂuid level is obtained, push the dipstick back in all the way. Engine Coolant The cooling system in your vehicle is ﬁlled with ®...
Page 368: What To Use
What to Use Use a mixture of one-half clean, drinkable water ® and one-half DEX-COOL coolant which will not damage aluminum parts. If you use this coolant mixture, you do not need to add anything else. CAUTION: Adding only plain water to your cooling system can be dangerous.
Page 369 Checking Coolant The engine coolant surge tank is located in the rear of the engine compartment. See Engine Compartment Overview on page 352 for more information on location. CAUTION: Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly.
Page 370: Coolant Surge Tank Pressure Cap
Adding Coolant If you need more coolant, add the proper ® DEX-COOL coolant mixture at the surge tank, but only when the engine is cool. If the surge tank is empty, a special ﬁll procedure is necessary. See Engine Overheating on page 370 and Cooling System on page 373.
Page 371 If Steam Is Coming From Your Engine CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down.
Page 372: Overheated Engine Protection Operating
If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for about 10 minutes. If the warning does not come back on, you can drive normally. If the warning continues, pull over, stop, and park your vehicle right away.
Page 373: Cooling System
Cooling System When you decide it is safe to lift the hood, here is what you will see: 3.5L V6 Engine shown, 2.2L L4 and 3.9L V6 Engines similar A. Electric Engine Cooling Fans B. Engine Coolant Surge Tank C. Pressure Cap CAUTION: An electric engine cooling fan under the hood can start up even when the engine...
Page 374 The coolant level should be at or above the FULL COLD mark on the front of the coolant surge tank. If it is not, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump, or somewhere else in the cooling system.
Page 375 How to Add Coolant to the Coolant Surge Tank Notice: This vehicle has a speciﬁc coolant ﬁll procedure. Failure to follow this procedure could cause your engine to overheat and be severely damaged. If you have not found a problem yet, check to see if coolant is visible in the surge tank.
Page 376 CAUTION: Adding only plain water to your cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. Your vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, your engine could get too hot but you would not get the overheat warning.
Page 377 1. You can remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise about two or two and one-half turns. If you hear a hiss, wait for that to stop.
Page 378: Power Steering Fluid
3. Fill the coolant surge tank with the proper mixture, to the FULL COLD mark on the front of the surge tank. Wait about ﬁve minutes, then check to see if the level is below the FULL COLD mark. If the level is below the FULL COLD mark, add additional coolant to bring the level up to the mark.
Page 379 When to Check Power Steering Fluid Power steering ﬂuid is used in all vehicles with V6 engines. Vehicles with the 4-cylinder engine have electric power steering and do not use power steering ﬂuid. It is not necessary to regularly check power steering ﬂuid unless a leak is suspected in the system, or an unusual noise is heard.
Page 380: Windshield Washer Fluid
Windshield Washer Fluid What to Use When you need windshield washer ﬂuid, be sure to read the manufacturer’s instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a ﬂuid that has sufficient protection against freezing.
Page 381: Brakes
Brakes Brake Fluid Your brake master cylinder reservoir is ﬁlled with DOT-3 brake ﬂuid. See Engine Compartment Overview on page 352 for the location of the reservoir. There are only two reasons why the brake ﬂuid level in the reservoir might go down. The ﬁrst is that the brake ﬂuid goes down to an acceptable level during normal brake lining wear.
Page 382 What to Add When you do need brake ﬂuid, use only DOT-3 brake ﬂuid. Use new brake ﬂuid from a sealed container only. See Recommended Fluids and Lubricants on page 469. Always clean the brake ﬂuid reservoir cap and the area around the cap before removing it.
Page 383: Replacing Brake System Parts
CAUTION: The brake wear warning sound means that soon the brakes will not work well. That could lead to an accident. When you hear the brake wear warning sound, have your vehicle serviced. Notice: Continuing to drive with worn-out brake pads could result in costly brake repair. Some driving conditions or climates may cause a brake squeal when the brakes are ﬁrst applied or lightly applied.
Page 384: Battery
If you do not, your brakes may no longer work properly. For example, if someone puts in brake linings that are wrong for your vehicle, the balance between your front and rear brakes can change — for the worse. The braking performance you have come to expect can change in many other ways if someone puts in the wrong replacement brake parts.
Page 385 CAUTION: Batteries can hurt you. They can be dangerous because: • They contain acid that can burn you. • They contain gas that can explode or ignite. • They contain enough electricity to burn you. If you do not follow these steps exactly, some or all of these things can hurt you.
Page 386 Notice: If you leave your radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by your warranty. Always turn off your radio and other accessories when jump starting your vehicle. 3.
Page 387 5. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. Before you connect the cables, here are some things you should know. Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one.
Page 388 7. Do not let the other end touch metal. Connect it to the positive (+) terminal of the good battery. Use a remote positive (+) terminal if the vehicle has one. 8. Now connect the black negative ( ) cable to the negative ( ) terminal of the good battery.
Page 389 Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by your warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal.
Page 390: Bulb Replacement
Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 394. For any bulb changing procedure not listed in this section, contact your dealer. Halogen Bulbs CAUTION: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb.
Page 391 To replace one of these bulbs, do the following: 1. Open the hood. See Hood Release on page 350 for more information. 2. Remove the two bolts attaching the headlamp assembly to the vehicle. 3. Remove the headlamp assembly from the vehicle by pulling it forward.
Page 392: Taillamps, Turn Signal, Stoplamps And Back-Up Lamps
6. Remove the bulb 7. Replace the old bulb with a new bulb. 8. Turn the bulb socket clockwise and reconnect the wiring harness to the bulb socket. 9. Return the headlamp assembly to its original position. Be sure to line up the holes in the lamp assembly to the round ends of the mounting pins.
Page 393 2. Remove the two fasteners located on the inside of the trunk at the rear of the vehicle. 3. Pull back the trunk trim. 4. Remove the plastic wing nut. 5. Pull out the taillamp assembly and turn the bulb socket one quarter turn counterclockwise. 6.
Page 394: License Plate Lamp
License Plate Lamp To replace the license plate lamp bulb, do the following: 1. Remove the two screws holding the license plate lamp assembly to the fascia. 2. Turn and pull the license plate lamp forward through the fascia opening. 3.
Page 395: Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear and cracking. See Scheduled Maintenance on page 460. To replace the wiper blade, do the following: 1. Pull the windshield wiper arm away from the windshield. 2. Press the tab that holds the wiper blade to the arm.
Page 396 Rear Wiper Blade Replacement – MAXX To replace the rear wiper blade, do the following: 1. Pull the wiper blade assembly away from the window. 2. Pull the wiper blade out of the wiper blade assembly, as shown. 3. Hold the wiper blade reﬁll with the curved side facing downward.
Page 397 4. Remove clip (A), shown in step 3, and slide it 5. Remove clip (B), shown in step 3, and slide it into the claw of the wiper blade assembly. into the remaining claw of the wiper blade assembly.
Page 398: Tires
Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your GM Warranty booklet for details. For additional information refer to the tire manufacturer’s booklet included with your vehicle.
Page 399: Winter Tires
Low-Proﬁle Performance Tire If your vehicle has P225/50R18 or P225/50R17 size tires, they are classiﬁed as low-proﬁle performance tires. These tires are designed for very responsive driving on wet or dry pavement. You may also notice more road noise with low-proﬁle performance tires and that they tend to wear faster.
Page 400: Tire Sidewall Labeling
If you choose to use winter tires: • Use tires of the same brand and tread type on all four wheel positions. • Use only radial ply tires of the same size, load range, and speed rating as the original equipment tires.
Page 401 (B) TPC Spec (Tire Performance Criteria Speciﬁcation): Original equipment tires designed to GM’s speciﬁc tire performance criteria have a TPC speciﬁcation code molded onto the sidewall. GM’s TPC speciﬁcations meet or exceed all federal safety guidelines. (C) DOT (Department of Transportation): The Department of Transportation (DOT) code indicates that the tire is in compliance with the U.S.
Page 402 Compact Spare Tire Example (A) Temporary Use Only: The compact spare tire or temporary use tire has a tread life of approximately 3,000 miles (5 000 km) and should not be driven at speeds over 65 mph (105 km/h). The compact spare tire is for emergency use when a regular road tire has lost air and gone ﬂat.
Page 403 (G) TPC Spec (Tire Performance Criteria Speciﬁcation): Original equipment tires designed to GM’s speciﬁc tire performance criteria have a TPC speciﬁcation code molded onto the sidewall. GM’s TPC speciﬁcations meet or exceed all federal safety guidelines. Tire Size The following illustration shows an example of a typical passenger vehicle tire size.
Page 404: Tire Terminology And Deﬁnitions
Tire Terminology and Deﬁnitions Air Pressure: The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight: This means the combined weight of optional accessories.
Page 405 Intended Outboard Sidewall: The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. Kilopascal (kPa): The metric unit for air pressure. Light Truck (LT-Metric) Tire: A tire used on light duty trucks and some multipurpose passenger vehicles.
Page 406 Radial Ply Tire: A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim: A metal support for a tire and upon which the tire beads are seated. Sidewall: The portion of a tire between the tread and the bead.
Page 407: Inﬂation - Tire Pressure
Inﬂation - Tire Pressure Tires need the correct amount of air pressure to operate effectively. Notice: Do not let anyone tell you that under-inﬂation or over-inﬂation is all right. It is not. If your tires do not have enough air (under-inﬂation), you can get the following: •...
Page 408: High-Speed Operation
How to Check Use a good quality pocket-type gage to check tire pressure. You cannot tell if your tires are properly inﬂated simply by looking at them. Radial tires may look properly inﬂated even when they are under-inﬂated. Check the tire’s inﬂation pressure when the tires are cold.
Page 409: Tire Inspection And Rotation
When you end high-speed driving return the tires to the cold inﬂation pressure shown on the Tire and Loading Information label. See Loading Your Vehicle on page 322 and Inﬂation - Tire Pressure on page 407. Tire Inspection and Rotation Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km).
Page 410: When It Is Time For New Tires
Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Speciﬁcations on page 455. CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time.
Page 411: Buying New Tires
You need a new tire if any of the following statements are true: • You can see the indicators at three or more places around the tire. • You can see cord or fabric showing through the tire’s rubber. • The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric.
Page 412 GM’s exclusive TPC Spec system considers over a dozen critical speciﬁcations that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM’s TPC Spec number is molded onto the tire’s sidewall by the tire manufacturer. If the tires have an all-season tread design, the TPC spec number will be followed by an MS for mud and snow.
Page 413: Different Size Tires And Wheels
If you must replace your vehicle’s tires with those that do not have a TPC Spec number, make sure they are the same size, load range, speed rating, and construction type (radial and bias-belted tires) as your vehicle’s original tires. Your vehicle’s original equipment tires are listed on the Tire and Loading Information label.
Page 414: Uniform Tire Quality Grading
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance.
Page 415: Wheel Alignment And Tire Balance
Temperature – A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a speciﬁed indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Page 416 If you need to replace any of your wheels, wheel bolts, or wheel nuts, replace them only with new GM original equipment parts. This way, you will be sure to have the right wheel, wheel bolts, and wheel nuts for your vehicle. CAUTION: Using the wrong replacement wheels, wheel bolts, or wheel nuts on your vehicle...
Page 417: Tire Chains
Tire Chains CAUTION: If your vehicle has P215/60R16, P225/50R17, or P225/50R18 size tires, do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts.
Page 418: If A Tire Goes Flat
If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is much more likely to leak out slowly. But if you should ever have a blowout, here are a few tips about what to expect and what to do: If a front tire fails, the ﬂat tire will create a drag...
Page 419 CAUTION: Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people. You and they could be badly injured or even killed. Find a level place to change your tire. To help prevent the vehicle from moving: 1.
Page 420: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools The equipment you will need is in the trunk or cargo area. 1. Open the trunk for sedan models. See Trunk (Sedan) on page 112 for more information. For MAXX models, open the liftgate. See Liftgate (MAXX) on page 113.
Page 421 Tire Changing Tools Sedan shown, MAXX Models and Sedan SS similar The tools you will be using include the wheel wrench (A) and jack (B). The MAXX and all SS models include an additional extension. 1. Turn the plastic wing nut counterclockwise to loosen wheel wrench.
Page 422: Removing The Flat Tire And Installing
3. Extend the handle on the wheel wrench by pressing the button with your index ﬁnger and pulling on the end of the wrench. You must do this before using the wheel wrench. Removing the Flat Tire and Installing the Spare Tire 1.
Page 423 3. Use the wrench to loosen all the wheel nuts. Do not remove them yet. 4. It is recommended that you do a safety check before preceding. See Changing a Flat Tire on page 418 for more information. 5. Position the lift head at the jack location nearest the ﬂat tire.
Page 424 6. Put the compact spare tire near the ﬂat tire being changed. CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack.
Page 425 8. Remove all of the wheel nuts. 9. Remove the ﬂat tire. CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after time. The wheel could come off and cause an accident.
Page 426 11. Install the compact spare tire. CAUTION: Never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheel could fall off, causing a serious accident. 12. Put the wheel nuts back on with the rounded end toward the wheel.
Page 427 CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose and even come off. This could lead to an accident. Be sure to use the correct wheel nuts. If you have to replace them, be sure to get new GM original equipment wheel nuts.
Page 428: Storing A Flat Or Spare Tire And Tools (Sedan)
Storing a Flat or Spare Tire and Tools (Sedan) Storing a Flat Tire and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone.
Page 429 4. Place the jack and wheel wrench (D) over the bolt (E), inside the wheel. 5. Secure by tightening the larger wing nut (B) onto the bolt (E). 6. Reinstall the tire cover (A). Storing the Compact Spare Tire The compact spare tire is for temporary use only. Store the compact spare tire and tools as shown in the following diagram.
Page 430: Storing A Flat Or Spare Tire And Tools (Sedan Ss)
Storing a Flat or Spare Tire and Tools (Sedan SS) CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
Page 431 7. Reach under the wheel and lift the bolt extension (A) so that the threaded end of the bolt passes through the center hole of the wheel. 8. Remove the yellow cap. 9. Secure the tire and wheel with the retainer. 10.
Page 432: Storing A Flat Or Spare Tire And Tools (All Maxx Models)
Storing the Compact Spare Tire The compact spare tire is for temporary use only. Store the compact spare tire and tools as shown in the following diagram. A. Cover E. Jack, Wheel B. Retainer Wrench and Bolt C. Flat Tire Extension D.
Page 433 Storing the Flat Tire and Tools To store the ﬂat tire and jack in the compact spare tire compartment, do the following: 1. Open the liftgate. See Liftgate (MAXX) on page 113 for more information. 2. Remove the bolt extension (in the yellow sleeve) from the jack and remove the center cap from the wheel.
Page 434 A. Retainer E. Bolt Extension B. Cover F. Bracket C. Flat Tire (Valve G. Jack and Wheel Stem Up) Wrench D. Nut H. Bolt Storing the Compact Spare Tire and Tools The compact spare tire is for temporary use only. Store the compact spare tire and tools as shown in the following diagram.
Page 435: Compact Spare Tire
The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can. See Compact Spare Tire on page 435. Compact Spare Tire Although the compact spare tire was fully inﬂated when the vehicle was new, it can lose air after a time.
Page 436: Appearance Care
Appearance Care Cleaning the Inside of Your Vehicle Your vehicle’s interior will continue to look its best if it is cleaned often. Although not always visible, dust and dirt can accumulate on your upholstery. Dirt can damage carpet, fabric, leather, and plastic surfaces.
Page 437: Fabric/Carpet
Your dealer has a product for cleaning your vehicle’s glass. Should it become necessary, you can also obtain a product from your dealer to remove odors from your vehicle’s upholstery. Do not clean your vehicle using the following cleaners or techniques: •...
Page 438: Leather
To clean, use the following instructions: 1. Saturate a lint-free, clean white cloth with water or club soda. 2. Wring the cloth to remove excess moisture. 3. Start on the outside edge of the soil and gently rub toward the center. Continue cleaning, using a clean area of the cloth each time it becomes soiled.
Page 439: Ultra Lux Suede
Ultra Lux Suede Cleaning Ultra Lux Suede Use a mild solution of lukewarm water and a neutral dish soap on a soft cloth or sponge. For the following stains, follow these instructions: Coffee, Tea, and Milk: Blot with a clean, soft, white cloth.
Page 440: Care Of Safety Belts
Care of Safety Belts Keep belts clean and dry. CAUTION: Do not bleach or dye safety belts. If you do, it may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Page 441: Cleaning Exterior Lamps/Lenses
Cleaning Exterior Lamps/Lenses Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow instructions under Washing Your Vehicle on page 440. Finish Care Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint ﬁnish.
Page 442: Aluminum Wheels
Grime from the windshield will stick to the wiper blades and affect their performance. Clean the blade by wiping vigorously with a cloth soaked in full-strength windshield washer solvent. Then rinse the blade with water. Check the wiper blades and clean them as necessary;...
Page 443: Tires
Tires To clean the tires, use a stiff brush with tire cleaner. Notice: Using petroleum-based tire dressing products on your vehicle may damage the paint ﬁnish and/or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on your vehicle. Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body...
Page 444: Chemical Paint Spotting
Chemical Paint Spotting Some weather and atmospheric conditions can create a chemical fallout. Airborne pollutants can fall upon and attack painted surfaces on the vehicle. This damage can take two forms: blotchy, ring-shaped discolorations, and small, irregular dark spots etched into the paint surface. Although no defect in the paint job causes this, GM will repair, at no charge to the owner, the surfaces of new vehicles damaged by this fallout condition...
Page 445: Vehicle Identiﬁcation
Vehicle Care/Appearance Materials (cont’d) Description Cleans, shines and Foaming Tire Shine Low protects in one easy step, Gloss no wiping necessary. Medium foaming shampoo. Cleans and Wash Wax Concentrate lightly waxes. Biodegradable and phosphate free. Quickly and easily removes spots and stains Spot Lifter from carpets, vinyl and suede upholstery.
Page 446: Service Parts Identiﬁcation Label
Service Parts Identiﬁcation Label You will ﬁnd this label on the inside of the glove box. It is very helpful if you ever need to order parts. On this label, you will ﬁnd the following: • • Model designation • Paint information •...
Page 447: Power Windows And Other Power
Power Windows and Other Power Options The power window motors are protected by a circuit breaker in the motor, and a fuse in the fuse panel. If the motor overheats due to a heavy load the window will stop until the motor cools. When the current load is too heavy the fuse will open, protecting the circuit until the problem is ﬁxed.
Page 448 Fuses POWER Power Mirrors MIRRORS Electric Power Steering Usage RUN/CRANK Fuses Usage Cruise Control, Electronic Range Select, Driver Shift Control, Passenger Airbag Status Indicator...
Page 449 Fuses Usage HVAC BLOWER HIGH Climate Control System (Relay) CLUSTER/ Instrument Panel Cluster, Theft THEFT Deterrent System ® ONSTAR OnStar System Not Used INSTALLED AIRBAG (IGN) Airbag System HVAC Climate Control System CTRL (BATT) PEDAL Adjustable Throttle and Brake Pedal WIPER SW Windshield Wiper/Washer Switch IGN SENSOR...
Page 450: Engine Compartment Fuse Block
Engine Compartment Fuse Block The engine compartment fuse block is located on the driver’s side of the vehicle, near the battery. See Engine Compartment Overview on page 352 for more information on location.
Page 451 Fuses Usage Air Conditioning Clutch Electronic Throttle Control Engine Control Module (IGN 1) (V6) Transmission Emission 1 Left Headlamp Low-Beam Horn Right Headlamp Low-Beam Front Fog Lamps Left Headlamp High-Beam Right Headlamp High-Beam Engine Control Module (BATT) (L4) Windshield Wiper Anti-lock Brake System Engine Control Module (IGN 1) (L4) Cooling Fan 1...
Page 452: Rear Compartment Fuse Block
Relays Cooling Fan 1 Cooling Fan Mode Series/Parallel Cooling Fan 2 Starter Run/Crank Ignition Powertrain Air Conditioning Clutch High-Beam Headlamps Front Fog Lamps Horn Low-Beam Headlamps Windshield Wiper 1 Windshield Wiper 2 Daytime Running Lamps Rear Compartment Fuse Block Usage The rear compartment fuse block is located in the trunk of the vehicle.
Page 453 Fuses Usage Not Used Driver Seat Controls Not Used Fuses Usage Not Used Emission Parklamps...
Page 454 Fuses Not Used Not Used Not Used Sunroof Controls Not Used Auxiliary Power 2 Not Used Heated Seat Controls Not Used Remote Keyless Entry System, XM Satellite Radio, Rear Seat Entertainment System, Homelink Back-up Lamps Not Used Not Used Cigarette Lighter, Auxiliary Power Outlet Not Used Trunk...
Page 455: Capacities And Speciﬁcations
Capacities and Speciﬁcations The following approximate capacities are given in English and metric conversions. Please refer to Recommended Fluids and Lubricants on page 469 for more information. Application Air Conditioning Refrigerant R134a Automatic Transaxle Complete Overhaul Automatic Transaxle 4T45-E Automatic Transaxle 4T65-E Cooling System 2.2L L4 Engine 3.5L V6 and 3.9L V6 Engines...
Page 456 Application Fuel Tank Sedan Malibu Maxx Wheel Nut Torque All capacities are approximate. When adding, be sure to ﬁll to the appropriate level, as recommended in this manual. Engine 2.2L L4 3.5L V6 3.9L V6 Engine Speciﬁcations VIN Code Transaxle Automatic Automatic Automatic...
Page 457: Maintenance Schedule
Section 6 Maintenance Schedule ... 458 Introduction ... 458 Maintenance Requirements ... 458 Your Vehicle and the Environment ... 458 Using the Maintenance Schedule ... 459 Scheduled Maintenance ... 460 Additional Required Services ... 463 Maintenance Footnotes ... 464 Owner Checks and Services ... 465 Maintenance Schedule At Each Fuel Fill ...
Page 458: Maintenance Schedule
Maintenance Schedule Introduction Important: Keep engine oil at the proper level and change as recommended. Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and Owner Assistance booklet or your dealer for details. Maintenance Requirements Notice: Maintenance intervals, checks, inspections, replacement parts, and...
Page 459: Using The Maintenance Schedule
Using the Maintenance Schedule We at General Motors want to help you keep your vehicle in good working condition. But we do not know exactly how you will drive it. You may drive very short distances only a few times a week. Or you may drive long distances all the time in very hot, dusty weather.
Page 460: Scheduled Maintenance
When you go to your GM Goodwrench your service needs, you will know that GM-trained and supported service technicians will perform the work using genuine GM parts. If you want to purchase service information, see Service Publications Ordering Information on page 497.
Page 461 When the CHANGE OIL SOON message appears, certain services, checks, and inspections are required. Required services are described in the following for “Maintenance I” and “Maintenance II.” Generally, it is recommended that your ﬁrst service be Maintenance I, your second service be Maintenance II, and that you alternate Maintenance I and Maintenance II thereafter.
Page 462 Scheduled Maintenance (cont’d) Service Maintenance I Maintenance II Rotate tires and check inﬂation pressures and wear. See Tire Inspection and Rotation on page 409 and “Tire Wear Inspection” in At Least Once a Month on page 466. Inspect brake system. See footnote (a). Check engine coolant and windshield washer ﬂuid levels and add ﬂuid as needed.
Page 463: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Inspect exhaust system for loose or damaged components.
Page 464: Maintenance Footnotes
Maintenance Footnotes (a) Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chaﬁng, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc. (b) Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts or signs of wear.
Page 465: Owner Checks And Services
(h) Change automatic transaxle ﬂuid and ﬁlter if the vehicle is mainly driven under one or more of these conditions: − In heavy city traffic where the outside temperature regularly reaches 90°F (32°C) or higher. − In hilly or mountainous terrain. −...
Page 466: At Each Fuel Fill
At Each Fuel Fill It is important to perform these underhood checks at each fuel ﬁll. Engine Oil Level Check Check the engine oil level and add the proper oil if necessary. See Engine Oil on page 357 for further details. Notice: It is important to check your oil regularly and keep it at the proper level.
Page 467: At Least Once A Year
At Least Once a Year Starter Switch Check CAUTION: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle. 2.
Page 468 Ignition Transaxle Lock Check While parked, and with the parking brake set, try to turn the ignition to OFF in each shift lever position. • The ignition should turn to OFF only when the shift lever is in PARK (P). •...
Page 469: Recommended Fluids And Lubricants
Recommended Fluids and Lubricants Fluids and lubricants identiﬁed below by name, part number, or speciﬁcation may be obtained from your dealer. Usage Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Certiﬁed for Gasoline Engines Engine Oil starburst symbol.
Page 470: Normal Maintenance Replacement Parts
Normal Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your GM dealer. Part Engine Air Cleaner/Filter Engine Oil Filter 2.2L L4 Engine 3.5L V6 and 3.9L V6 Engines Spark Plugs 2.2L L4 Engine 3.5L V6 and 3.9L V6 Engines Windshield Wiper Blades Driver’s Side –...
Page 471: Engine Drive Belt Routing
Engine Drive Belt Routing 3.5L V6 Engine 2.2L L4 Engine...
Page 472 3.9L V6 MAXX Engine...
Page 473: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 458. Any additional information from Owner Checks and Services on page 465 can be added on the following record pages.
Page 474 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 475 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 476 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 477: Customer Assistance Information
Section 7 Customer Assistance and Information ... 478 Customer Satisfaction Procedure ... 478 Online Owner Center ... 481 Customer Assistance for Text Telephone (TTY) Users ... 482 Customer Assistance Offices ... 482 GM Mobility Reimbursement Program ... 483 Roadside Assistance Program ... 484 Courtesy Transportation ...
Page 478: Customer Assistance And Information
Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Chevrolet. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
Page 479 STEP THREE — U.S. Owners: Both General Motors and your dealer are committed to making sure you are completely satisﬁed with your new vehicle. However, if you continue to remain unsatisﬁed after following the procedure outlined in Steps 1 and 2, you should ﬁle with the BBB Auto Line Program to enforce your rights.
Page 480 STEP THREE — Canadian Owners: In the event that you do not feel your concerns have been addressed after following the procedure outlined in Steps 1 and 2, General Motors of Canada Limited wants you to be aware of its participation in a no-charge Mediation/Arbitration Program.
Page 481: Online Owner Center
Online Owner Center Online Owner Center (United States only) The Owner Center is a resource for your GM ownership needs. Speciﬁc vehicle information can be found in one place. The Online Owner Center allows you to: • Get e-mail service reminders. •...
Page 482: Customer Assistance For Text Telephone (Tty) Users
(TTY users in Canada can dial 1-800-263-3830.) Customer Assistance Offices Chevrolet encourages customers to call the toll-free number for assistance. However, if a customer wishes to write or e-mail Chevrolet, the letter should be addressed to: United States — Customer Assistance Chevrolet Motor Division Chevrolet Customer Assistance Center P.O.
Page 483: Gm Mobility Reimbursement Program
Overseas — Customer Assistance Please contact the local General Motors Business Unit. Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V. Customer Assistance Center Paseo de la Reforma # 2740 Col.
Page 484: Roadside Assistance Program
(1-800-243-8872) In Canada, call 1-800-268-6800 Service available 24 hours a day, 365 days a year. As the owner of a new Chevrolet vehicle, you are automatically enrolled in the Chevrolet Roadside Assistance program. This value-added service is intended to provide you with peace of mind as you drive in the city or travel the open road.
Page 485 • Emergency Tow From a Public Roadway or Highway: Tow to the nearest dealership for warranty service or in the event of a vehicle-disabling accident. Winch-out assistance when the vehicle is mired in sand, mud, or snow. • Flat Tire Change: If your vehicle has a spare tire, installation of the tire in good condition will be covered at no charge.
Page 486 Roadside Assistance. In many instances, mechanical failures are covered under Chevrolet’s Bumper-to-Bumper warranty, and the duration of the Base Warranty Coverage for Canadian customers of the new Vehicle Limited Warranty. However, any cost for parts and labor for non-warranty repairs are the responsibility of the driver.
Page 487: Courtesy Transportation
(1-800-243-8872), text telephone (TTY) users, call 1-888-889-2438, Canadian customers call 1-800-268-6800. Chevrolet and General Motors of Canada Limited reserve the right to limit services or reimbursement to an owner or driver when, in their sole discretion, the claims become excessive in frequency or type of occurrence.
Page 488 Courtesy Transportation is not a part of the New Vehicle Limited Warranty and is available only at participating dealers. A separate booklet entitled “Warranty and Owner Assistance Information” furnished with each new vehicle provides detailed warranty coverage information. Scheduling Service Appointments When your vehicle requires warranty service, you should contact your dealer and request an appointment.
Page 489 In addition, for U.S. customers, should you arrange transportation through a friend or relative, limited reimbursement for reasonable fuel expenses may be available. Claim amounts should reﬂect actual costs and be supported by original receipts. Courtesy Rental Vehicle Your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle that you obtain if your vehicle is kept for an overnight warranty repair.
Page 490: Vehicle Data Collection And Event Data Recorders
Vehicle Data Collection and Event Data Recorders Your vehicle, like other modern motor vehicles, has a number of sophisticated computer systems that monitor and control several aspects of the vehicle’s performance. Your vehicle uses on-board vehicle computers to monitor emission control components to optimize fuel economy, to monitor conditions for airbag deployment and, if the vehicle has the Anti-lock Brake System (ABS), to...
Page 491: Collision Damage Repair
In addition, once GM collects or receives data, GM may: • use the data for GM research needs, • make it available for research where appropriate conﬁdentiality is to be maintained and need is shown, or • share summary data which is not tied to a speciﬁc vehicle with non-GM organizations for research purposes.
Page 492 Recycled original equipment parts may also be used for repair. These parts are typically removed from vehicles that were total losses in prior accidents. In most cases, the parts being recycled are from undamaged sections of the vehicle. A recycled original equipment GM part, may be an acceptable choice to maintain your vehicle’s originally designed appearance and safety performance, however, the history of these parts...
Page 493 If your vehicle is leased, the leasing company may require you to have insurance that assures repairs with Genuine GM Original Equipment Manufacturer (OEM) parts or Genuine Manufacturer replacement parts. Read your lease carefully, as you may be charged at the end of your lease for poor quality repairs.
Page 494 • Gather the important information you will need from the other driver. Things like name, address, phone number, driver’s license number, vehicle license plate, vehicle make, model and model year, Vehicle Identiﬁcation Number (VIN), insurance company and policy number, and a general description of the damage to the other vehicle.
Page 495 Managing the Vehicle Damage Repair Process In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there.
Page 496: Reporting Safety Defects
General Motors In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you will notify General Motors. Please call the Chevrolet Customer Assistance Center at 1-800-222-1020, or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P.O.
Page 497: Service Publications Ordering Information
In Canada, please call us at 1-800-263-3777 (English) or 1-800-263-7854 (French). Or, write: General Motors of Canada Limited Customer Communication Centre, CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body, etc.
Page 498 Owner Information Owner publications are written speciﬁcally for owners and intended to provide basic operational information about the vehicle. The owner manual will include the Maintenance Schedule for all models. In-Portfolio: Includes a Portfolio, Owner Manual, and Warranty Booklet. RETAIL SELL PRICE: $35.00 US + Processing Fee Without Portfolio: Owner’s Manual only.
Page 499 Accessories and Modiﬁcations ... 342 Accessory Power Outlet(s) ... 187 Adding Equipment to Your Airbag- Equipped Vehicle ... 91 Additives, Fuel ... 345 Add-On Electrical Equipment ... 446 Adjustable Throttle and Brake Pedal ... 124 Air Cleaner/Filter, Engine ... 362 Air Conditioning ...
Page 500 Appearance Care (cont.) Audio System(s) ... 227 Audio Steering Wheel Controls ... 281, 282 Backglass Antenna ... 285 Care of Your CD and DVD Player ... 284 Care of Your CDs and DVDs ... 284 Fixed Mast Antenna ... 284 Radio with CD ...
Page 501 Calibration ... 140, 142 California Fuel ... 345 California Proposition 65 Warning ... 343 Canadian Owners ... 3 Capacities and Speciﬁcations ... 455 Carbon Monoxide ... 112, 113, 138, 316, 331 Care of Safety Belts ... 440 Your CD and DVD Player ... 284 Your CDs and DVDs ...
Page 502 Competitive Driving ... 305 Content Theft-Deterrent ... 116 Control of a Vehicle ... 292 Convenience Net ... 162 Coolant Engine Temperature Gage ... 212 Engine Temperature Warning Light ... 211 Heater, Engine ... 125 Surge Tank Pressure Cap ... 370 Cooling System ...
Page 503 Driving At Night ... 306 City ... 310 Defensive ... 288 Drunken ... 289 Freeway ... 311 Hill and Mountain Roads ... 314 In Rain and on Wet Roads ... 307 Rocking Your Vehicle to Get it Out ... 321 Winter ...
Page 504 Filter Engine Air Cleaner ... 362 Finish Damage ... 443 Fixed Mast Antenna ... 284 Flashers, Hazard Warning ... 170 Flash-to-Pass ... 173 Flat Tire ... 418 Flat Tire, Changing ... 418 Flat Tire, Storing ... 428, 430, 432 Fluid Automatic Transaxle ...
Page 505 Hazard Warning Flashers ... 170 Head Restraints ... 13 Headlamp Wiring ... 446 Headlamps Automatic Headlamp System ... 184 Bulb Replacement ... 390 Daytime Running Lamps ... 183 Delayed ... 182 Flash-to-Pass ... 173 Halogen Bulbs ... 390 Headlamps, Front Turn Signal, and Parking Lamps ...
Page 506 Labeling, Tire Sidewall ... 400 Lamps Battery Run-Down Protection ... 187 Cargo ... 186 Dome ... 185 Exterior ... 179 Fog ... 185 Front Reading ... 186 Rear Reading ... 186 Trunk ... 186 LATCH System Child Restraints ... 58 License Plate Lamps ...
Page 507 Maintenance Schedule Additional Required Services ... 463 At Each Fuel Fill ... 466 At Least Once a Month ... 466 At Least Once a Year ... 467 Introduction ... 458 Maintenance Footnotes ... 464 Maintenance Record ... 473 Maintenance Requirements ... 458 Normal Maintenance Replacement Parts ...
Page 508 ® OnStar System, see OnStar Other Warning Devices ... 170 Outlet Adjustment ... 199 Outlet(s), Accessory Power ... 187 Outside Convex Mirror ... 144 Power Heated Mirrors ... 144 Power Mirrors ... 144 Overheated Engine Protection Operating Mode ... 372 Owner Checks and Services ...
Page 509 Radios (cont.) Setting the Time for Radios with Radio Data Systems (RDS) ... 229 Setting the Time for Radios without Radio Data Systems (RDS) ... 228 Theft-Deterrent ... 281 Understanding Reception ... 283 Rear Compartment Storage Panel/Cover ... 160 Rear Door Security Locks ... 110 Rear Reading Lamps ...
Page 510 Safety Belt Passenger Reminder Light ... 203 Pretensioners ... 43 Reminder Light ... 203 Safety Belts Care of ... 440 Driver Position ... 26 How to Wear Safety Belts Properly ... 26 Questions and Answers About Safety Belts ... 25 Rear Safety Belt Comfort Guides ...
Page 511 Setting the Time Radios with Radio Data Systems (RDS) ... 229 Radios without Radio Data Systems (RDS) ... 228 Sheet Metal Damage ... 443 Shifting Into Park (P) ... 135 Shifting Out of Park (P) ... 136 Shoulder Belt Height Adjuster ... 34 Signals, Turn and Lane-Change ...
Page 512 Theft-Deterrent, Radio ... 281 Theft-Deterrent Systems ... 116 Content Theft-Deterrent ... 116 ® PASS-Key III+ ... 118 ® PASS-Key III+ Operation ... 119 Throttle, Adjustable ... 124 Tires ... 398 Aluminum Wheels, Cleaning ... 442 Buying New Tires ... 411 Chains ...
Page 513 Transaxle Fluid, Automatic ... 363, 364 Transaxle Operation, Automatic ... 127, 130 Trip Odometer ... 202 Trunk ... 112 Trunk Lamps ... 186 Turn and Lane-Change Signals ... 172 Turn Signal/Multifunction Lever ... 171 Understanding Radio Reception ... 283 Uniform Tire Quality Grading ... 414 Universal Home Remote System ...
Page 514 Windows ... 114 Power ... 115 Windshield Washer ... 174 Washer Fluid ... 380 Wiper Blade Replacement ... 395 Wiper Blades, Cleaning ... 441 Wiper Fuses ... 446 Wipers ... 173 Windshield, Rear Washer/Wiper ... 175 Winter Driving ... 316 Winter Tires ...

This manual is also suitable for:

2007 malibu

Chevrolet Malibu 2007 Malibu Owner's Manual

M 2007 Chevrolet Malibu Owner Manual

Section 1 Seats and Restraint Systems

Seats and Restraint Systems

Front Seats

Rear Seats

Safety Belts

Child Restraints

Airbag System

Restraint System Check

Section 2 Features and Controls

Features and Controls

Keys

Doors and Locks

Windows

Theft-Deterrent Systems

Starting and Operating Your Vehicle

Mirrors

Onstar ® System

Universal Home Remote System

Storage Areas

Sunroof

Section 3 Instrument Panel

Instrument Panel

Instrument Panel Overview

Instrument Panel

Climate Controls

Warning Lights, Gages, and Indicators

Driver Information Center (DIC)

Audio System(S)

Section 4 Driving Your Vehicle

Driving Your Vehicle

Your Driving, the Road, and Your Vehicle

Towing

Section 5 Service and Appearance Care

Service

Fuel

The Hood

Checking Things under

Bulb Replacement

Windshield Wiper Blade Replacement

Tires

Appearance Care

Vehicle Identiﬁcation

Electrical System

Capacities and Speciﬁcations

Quick Links

Chapters

Related Manuals for Chevrolet Malibu 2007 Chevrolet Malibu

Summary of Contents for Chevrolet Malibu 2007 Chevrolet Malibu