Chevrolet 4500 HD 2023 Manual page 37

36 Seats and Restraints
Warning
To help avoid personal injury or death
during a collision or sudden maneuver,
always thread both the lap and shoulder
belt through the locking clip when
securing a child restraint on the outboard
seat. If the clip is not used or installed
properly, the child restraint may move or
tip over when your vehicle turns or stops
abruptly.
Secure the child restraint with the lap belt
portion (1) of the seat belt in accordance
with the restraint manufacturer's
instructions. Then thread both the lap (1)
and shoulder belt (2) portions through the
locking clip. Push and pull the child restraint
in all directions to be sure it is secure.
Locking Clip Attached to Seat Belt
Side View
1. Lap Belt
2. Shoulder Belt
3. Locking Clip
When your child restraint is not installed,
remove the locking clip to permit normal
use of the lap-shoulder belt. Keep the
locking clip in the glove box to help prevent
its loss.
Child Restraint with Top Tether
Warning
We do not recommend using a child
restraint that requires the use of a top
tether. There is no appropriate place to
attach a top tether anchor behind the
seat in this vehicle.