Table of Contents
Advertisement
21. STANDARD TIGHTENING TORQUES
21 .I INTRODUCTION
OF NECESSARY TOOLS
The following tools are needed when carrying out maintenance.
No
Name of tool
Part No.
1.
Wrench Set
09000-30006
2.
3.
4.
5.
Tool Kit
276 820 R91
Filter Wrench
DR02-535
Grease Pump
999 677 R91
Grease Cartridge
Remarks
Width across flats Sl, S2
End wrench - 8x10 mm
End wrench - 12x14 mm
End wrench - 13x17 mm
I%=Q
End wrench - 19x22 mm
S2
End wrench - 24x27 mm
End wrench - 30x33 mm
End wrench - 7/16X1/2
End wrench - 9/l 6x5/8
End wrench - 518x1 l/16
End wrench - 3/4x13/16
End wrench - 15/l 6x1
Screwdriver
- l/4 shank
Screwdriver
- 3/8 shank
Ball peen hammer
Pry bar - 9116x16
Adjustable wrench
Punch - 5/l 6x10
Chisel - 7/8x1 0
Punch - 3/l 6x10
Vise grip wrench
Slip joint plier
Diagonal (side) cutter
Tool box
Removal of filter cartridges.
For lubrication of machine.
For details of the fluid to use, see 20. USE OF FUEL, COOL-
ANT AND LUBRICANTS
ACCORDING
TO AMBIENT TEM-
PERATURE.
If any of the above tools are broken, please order them from your Komatsu distributor.
When not using the tools, always put them in the appropriate tool box.
3-14
Advertisement
Table of Contents
