Table of Contents
Advertisement
A
WARNING:
Failure to follow these safety
precautions
may lead to a serious accident.
8. PRECAUTIONS
FOR MAINTENANCE
8.2 DURING MAINTENANCE
+ Only authorized personnel can service and repair the machine. Extra precaution should be
used when grinding, welding, and using a sledge hammer.
Keep a safe distance
Place attachments
that have been removed from the machine in a safe place so that
they do not fall. If they fall on you or others, serious injury could result.
Always lower all movable work equipment to the ground or to their lowest position
before performing service or repairs under the machine.
Always block the track shoes of the machine securely.
Never work under the machine if the machine is poorly supported.
Spilled oil or grease, or scattered tools or broken pieces are danger-
ous because they may cause you to slip or trip. Always
keep
your
machine clean and tidy.
If water gets into the electrical
system, there is danger that the
machine may not move or may move unexpectedly.
Do not use water
or steam to clean the sensors,
connectors,
or the inside of the
operator's compartment.
1-17
Advertisement
Table of Contents
