Table of Contents
Advertisement
a
WARNING:
Failure to follow these safety
precautions
may lead to a serious accident.
8. PRECAUTIONS
FOR MAINTENANCE
8.1 BEFORE CARRYING OUT MAINTENANCE
If others start the engine or operate the controls
while you are performing service or lubrication, you
could suffer serious injury or death.
ALWAYS attach the WARNING TAG to the control
lever in the operator's cab to alert others that you
are working
on the machine. Attach additional
warning tags around the machine, if necessary.
DO NOT
operate
When this
plate
is not being used
keep it In the storage compartment.
_mmod
These tags are available from your distributor. (Part No. 09963-03000)
Use only tools suited to the task. Using damaged, low quality, faulty, or makeshift
tools could cause personal injury.
) Always stop the machine on firm flat ground and stop the engine before
carrying out inspection and maintenance.
) If it is necessary to run the engine when carrying out maintenance,
such
as when cleaning the inside of the radiator, place the safety lock lever in
the LOCK position and carry out the operation with two workers.
+ One worker should sit in the operator's seat so that he can stop the engine
immediately if necessary. He should also be extremely careful not to touch
any lever by mistake. Touch the levers only when they have to be operated.
+ The worker carrying out the maintenance
should be extremely careful not
to touch or get caught in any moving parts.
ACC
oyF
Advertisement
Table of Contents
