12. OPERATION
12.14 CHECK AFTER STOPPING ENGINE
1.
2.
3.
4.
Walk around the machine and check the work equipment,
paintwork,
and undercarriage,
and check also for leakage of oil or water. If any
abnormalities
are found, repair them.
Fill the fuel tank.
Check the engine compartment
for paper and debris. Clean out any
paper and debris to avoid a fire hazard.
Remove any mud stuck to the undercarriage.
12.15 LOCKING
Always lock the following places. Commercially available locks can be fitted
to the following places.
1. Instrument panel; Rotate cover (A) upward and secure with lock through
tang (B).
2. Access cover on engine hood.
3. Left side engine access door.
4. Battery box door.
5. Fuel tank cap.
6. Hydraulic tank door.
7. Right side engine access door.
2-55