How The Function Button Works - Microtek ArtixScanDI 2125c User Manual

NOTE:
1. When you have finished the settings for the function button in the interface,
2. If ScanWizard DI is launched and the Main interface (AP control panel) is

How the Function Button Works

When you finish customizing the function button, follow the steps below to
perform the scanning task by pressing the function button on the scanner. The
scan will be performed in accordance with the designated button function using
the parameters configured in the Scanner Button Settings interface.
1. Load the document to be scanned into the document feed tray of the
2. Exit the Scanner Button Settings interface.
3. Press the F1 button your scanner to activate the function associated with
4. If necessary, specify new settings for the F1 button. Follow the procedures
34 ArtixScan DI 2125c User's Manual
you have to exit interface before you perform the predefined scanning task
by pressing the function button on the scanner.
activated on the screen, the scanned image files will appear in the Thumbnail
View window for your viewing after you perform the scanning task by
pressing the function button on the scanner.
scanner.
the F1 button easily.
(steps 1 through 5) for the "Customizing the Function Button" section to
specify your new requirements for the F1 button.