How The Scanner Button Works - Microtek ArtixScanDI 2015c User Manual

5. Specify the function settings according to your requirements, then click the
Save button. The parameters currently specified for your selected function
button are saved. To define another custom function button if desired,
follow steps 2 through 5 of this section.
Note:
1. When you have finished the settings for the function buttons in the interface,
you have to exit interface before you perform the predefined scanning task
by pressing the function button on the scanner.
2. If ScanWizard DI is launched and the Main interface (AP control panel) is
activated on the screen, the scanned image files will appear in the Thumbnail
View window for your viewing after you perform the scanning task by
pressing the function button on the scanner.

How the Scanner Button Works

When you finish customizing the buttons, follow the steps below to perform the
scanning task by pressing the button on the scanner. The scan will be performed
in accordance with the designated button function using the parameters
configured in the Scanner Button Settings interface.
1. Place the document to be scanned either on the scanner's glass surface or
into the scanner's document feed tray.
2. Exit the Scanner Button Settings interface.
3. Press the F1, F2 or F3 button on your scanner to activate the function
associated with the F1, F2 or F3 button easily.
4. If necessary, specify new settings for each button. Follow the procedures
(steps 1 through 5) for the "Customizing the Scanner Buttons" section to
specify your new requirements for the buttons that you wish to redefine.
ArtixScan DI 2015c User's Manual 39