Copper Rj45 Port Leds - Extreme Networks ISW Series Installation Manual

Copper RJ45 Port LEDs

Figure 29: System Status LED locations
Copper RJ45 Port LEDs
There are two LEDs for each copper RJ45 port, located on either side of the port. The
LEDs indicate link, activity, and speed. The following table describes the colors and the
states for the LEDs.
LED
Link/Activity
52 ISW Series Managed Industrial Ethernet Switch Hardware Installation Guide
Color/State Models
Off All models
Solid Green
Flashing Green
Monitor the Switch
No link.
Link is up but no traffic is
detected.
Link is up and traffic is
detected.