Table of Contents
Advertisement
Reset, Upgrade or Downgrade Software
System Reset
Reset Configuration Defaults via CLI Command
Reset Configuration Defaults via Web UI
Upgrade and Downgrade Software
Use the following topics to reset the switch without removing power, reseet
configuration defaults using the command line or the Web UI, and upgrade or
downgrade the software.
System Reset
The Reset button is provided to reboot the system without the need to remove power.
Under normal circumstances, you will not have to use it. However, on rare occasions,
the ISW-Series might not respond and you may need to push the Reset button.
Figure 32: Reset Button for the 8-port and 12-port Switches
56
ISW Series Managed Industrial Ethernet Switch Hardware Installation Guide
on page 56
on page 59
on page 57
on page 58
Advertisement
Table of Contents
