Kenwood MIDl M-85 Instruction Manual page 55

Tuner
The clock display is blinking without
changing from a certain time.
@ There was a power failure. @ Set the current time again.
@ The power cord was unplugged. @ Set the current time again.
@ The timer execution has not been speci-
fied.
The timer does not work.
@ Specify execution by pressing the EXE.
key.
@ Connect an antenna.
@ Set the broadcast band properly.
@ Tune the frequency of the desired station.
@ No antenna is connected.
@ The broadcast band is not set properly.
@ The frequency of the desired station is
not tuned.
Radio stations cannot be received.
A station which was preset cannot be
received by pressing the corresponding
numeric key.
@ The preset station belongs to a frequency
that cannot be received.
@ The preset memory was cleared because
the power cord had been unplugged for a
long period of time.
@ Preset a station with a receivable frequen-
cy.
@ Preset the station again.
bile. road.
@ Noise due to an influence from an electric | @ Turn off the power of the appliance.
appliance.
set.
M-85/M-959 (En) 55