Kenwood MIDl M-85 Instruction Manual page 48

Be sure to adjust the present time before proceeding to
Timer operations
the following.
Pe
a Fe TR
a
a
@ Timer playback of CD
7 Select the PLAY mode.
BAND | —P
The timer modes are switched between PLAY and REC every time the
BAND key is pressed.
1 Switch the power ON.
ENTER
2 Select the program setting mode.
8 Select the CD source.
m7
pie —> TAPE —» TUNER —> ae
@ The program No. indicators (1 to 6) blink.
3 Select the program No. to be used.
The sources are switched every time the BAND key is pressed.
9 Place a disc in the CD player.
A Specify the day(s) of the week with the
numeric keys. 1 0 Activate the execution of the program.
EXE.
© Press the EXE. key.
ENTER
GIT TéTeTe ti = ic
@ See page 46.
5 Input the ON time with the numeric keys.
8:00AM :[0], [8], (0], [0]
ce T>[e*T*[e#}]eile =
®@ Select the program No. to be executed by pressing the
numeric key under which it is set.
3 3 7
rue THU sar
ENTER @ The selected program No. indicator lights up.
1 1 Adjust the volume and tone.
6 input the OFF time with the numeric keys.
Notes:
1. If you commit a mistake in the timer programming, press the [CLEAR] key and re-start from the beginning.
2. If it is required to modify a program which has already been set, set a new program from the beginning.
3. When a program has previously been set in the program No. selected in step 3, the newly-set program replaces the previous program.
4. Do not operate the key or key while the time program execution has been activated; otherwise malfunction will oc-
cur,
1 2 Switch the power OFF.
Press the POWER key
of the amplifier.
48 w-g5/-959 (En)