Kenwood MIDl M-85 Instruction Manual page 52

Timer operations
After setting the timer, one of the following opera-
tions can be added by pressing the Al TIMER keys.
The Al TIMER 1 and Al TIMER 2 do not function in the
timer recording mode.
@ Operation of Al TIMER 1
With this function, when the power is switched ON
by the program timer, the listening volume of the
component increases in three steps.
1 Set the timer playback of program timer.
Switch the power of the amplifier OFF.
2 Press the Al TIMER 1 key.
@ The Al TIMER 1 indicator
lights up.
Ai TIMER 1
Select the maximum volume.
VOL 1 VOL 2 VOL3
is (Smail ) —~ (Intermediate) —-~ (Maximum) —= OFF ;
@ The display of the maximum volume changes every time
the key is pressed. When the key is released, the display
goes off and the volume level at that moment is stored in
the memory.
To cancel Al TIMER 1
Press the Al TIMER 1 key
to select "OFF".
Al TIMER 1
@ The Al TIMER 1 indicator goes off.
Reference for volume selection
Volume level ——-
30 sec. i min. 1 min. 30 sec. Time —~
@ The MASTER VOLUME knob rotates as the volume
changes.
@ The graphic equalizer curve also changes.
52 m-85/M-959 (En)
Al TIMER 2 key
Al TIMER 1 key
@ Operation of Al TIMER 2
With this function, when the power is switched ON
by the program timer, two tracks on the CD is played
first, then the broadcast from the tuner is received
automatically. This function is given the highest
priority over other program timer functions.
1 Place a disc in the CD player.
2? Perform operations of "Timer reception of
radio broadcast".
@ Refer to page 47.
3 Press the Al TIMER 2 key.
AI TIMER 2
@ The Al TIMER 2 indicator lights up.
@ Also press the Al TIMER 1 key if you want to increase the
volume in three steps.
To cancel Al TIMER 2
Press the key again. ANE
@ The Al TIMER 2 indicator goes off.
Notes:
1.When the operation keys of the graphic equalizer or the
MASTER VOLUME key on the remote control unit is pressed
while the Al TIMER 1 function is carried out, the volume is
fixed at the level being set.
. If the TUNER or TAPE input selector key is selected during
the CD playback of Al TIMER 2, the CD playback stops there
and the Al TIMER 2 function is canceled.
3. If the operation keys of the CD player is pressed during the
CD playback of Al TIMER 2, the CD playback stops there and
the Al TIMER 2 function is canceled.
4. If the CD has not been inserted, reception of radio broadcast
Starts at the moment Al TIMER 2 is activated.
5. Even when the program timer operation has completed, the
Al TIMER 1 and 2 indicators do not go off. Be sure to turn off
the indicators when the Al TIMER 1 and/or 2 is not required
any more.
dD