Kenwood MIDl M-85 Instruction Manual page 34

Recording of CD playback (CCRS)
1 Set up Deck B ready for recording.
2 Select the CD input.
3 Insert the disc in the CD player.
ae —> Al EDIT —| MULTI EDIT 7]
Use the numeric keys of the CD player.
C-60 tape: Press {+10 |6 times, and | 20/0 | once.
C-46 tape: Press [+10 |4 times, and [6 jonce.
to establish the input.
Select the FADE or CROSS.
Notes:
7 Select the tracks to be recorded.
Using the numeric keys of the CD player, input the track
Nos. in the order they are to be recorded.
The time remaining on side A or side B is indicated on the
display. Note the amount of time remaining before entering
music piece numbers.
When the time remaining on side A is 30 seconds or less,
the next music piece is programmed on side B.
A music piece for which FAdE is displayed during input of
the music piece number on side A fades out. If another mu-
sic piece number is entered, programming takes piace on
side B from that music piece.
A music piece for which FAdE is displayed during input of
the music piece number on side B fades out. If another mu-
sic piece number is entered, "FULL" is displayed and no fur-
ther programming can be accepted.
8 Press the CCRS key.
Normal-speed recording
Double-speed recording
(nor T_gn_))
@ HIGH or NOR. is displayed in the display.
Recording occurs as shown below (examle when three CDs
are to be recorded).
—
When FAdE is displayed during input.
First CD ——> = Second CD
When FAdE is displayed during input.
@ Each time disc recording is completed, the CD player and
cassette deck stop together and the CD player tray comes
out automatically.
@ To record a second or third disc, change the disc and close
the disc tray, then repeat steps 7 and 8.
the tape time are matched accurately.
2. Track No. 44 or more cannot be input.
34 1-85/1M-959 (En)