Switch The Power On - Kenwood MIDl M-85 Instruction Manual

@ Timer reception of radio broadcast
1 Switch the power ON.
Press the POWER key
of the amplifier.
2 Select the program setting mode.
PROG.
@ The program No. indicators (1 to 6) blink.
Select from 1 to 6.
ENTER
@ The selected program No. indicator blinks.
7 7
(om [née Toe | mee foo | A | ak
ENTER
Ty
bh Input the ON time with the numeric keys.
6:30AM : oleae
@ See page 46.
ENTER
6 input the OFF time with the numeric keys.
7:00AM : ee
The timer modes are switched
between PLAY and REC every
time the BAND|key is pressed.
Notes:
Press within 10 seconds.
Be sure to adjust the present time before proceeding to
the following.
8 Select the TUNER source.
('
The sources are switched every time the |BAND)key is pressed.
@ "LAST' is selected when, for instance, DBS tuner or LD
player is being recorded.
9 Select the preset key under which the station
to be received has been preset.
@ Press the numeric key.
7
sat
@ Press the ENTER key.
@ The station must be preset previously.
1 0 Activate the execution of the program.
@® Press the EXE. key.
®@ Select the program No. to be executed by pressing the
numeric key under which it is set.
@ The selected program No. indicator lights up.
1 1 Adjust the volume and tone.
12 switch the power OFF.
POWER
Press the POWER key
of the amplifier.
To continue the reception of radio station which
as been started to be received by timer ON.
@ Press the CLEAR key before the OFF time comes.
@ Press the numeric key for the program No. being execut-
ed.
@ When the program No. indicator goes off, it means that the
program will be received continuously.
cur.
M-85/M-959 (En) 47