Table of Contents
Advertisement
11 Assembly
1
4
6
3
2. Mount the mounting bracket 6 on the actuator 3 using the
screws, washers and spring washers provided.
11.9 Remote mounting to quarter turn actuators
7
6
4
3
GEMÜ 1436 cPos
1
▶ The travel sensor's cable exit protective coating is not UV-
resistant and must therefore be protected against direct
exposure to weather.
1. Fix the positioner 1 somewhere suitable.
Mounting bracket
▶ The GEMÜ 1436 000 ZMP mounting bracket, which is
available separately, can be used for this.
2. Mount (see "Rotary travel sensor mounting kit assembly",
page 19)the travel sensor mounting kit.
Installation position
▶ Observe the correct orientation of the operating range of
the rotary travel sensor (see "Checking the mechanical
mounting", page 23).
3. Place the travel sensor 7 with adapter 4 and mounting
bracket 6 on the actuator 3.
22 / 76
NOTICE
NOTICE
NOTICE
www.gemu-group.com
7
6
4
3
7
4
6
3
Advertisement
Table of Contents
