Table of Contents
Advertisement
Connect the video source
(camcorder, VCR, or MDP, etc.)
and the video display (TV or
monitor) to the printer. Use the
devices equipped with VIDEO
input/output connectors.
(You cannot use the devices
which have only aerial
connectors.)
Connect the necessary devices
to the printer according to the
following procedures.
Notes
e Turn off the power of the other
equipment you will connect the
printer to before making the
connection.
¢ Do not connect the AC power
cord of the printer to the wall
outlet until all of the other
connections are completed.
e For connection, also refer to
the operating instructions of
the other equipment you will
connect the printer to.
e When using the twin-lead
cable (flat) to connect the
video equipment to the aerial,
noise may be heard if you
install the video device near
the printer. Keep it away from
the printer.
Connect the printer to the
television/monitor.
Connect the VIDEO OUTPUT connector of the
printer to the VIDEO input connector of TV, using
the supplied video connecting cable.
CVP-M3
to the S VIDEO
To the VIDEO
OUTPUT
'OUTPUT
TV with an S VIDEO input
3
|] Tothe s viDEO
E} input
TV with a VIDEO input
to the VIDEO input
=
co. : Signal flow
If you have a television with S VIDEO input'
output connectors, connect the S VIDEO
OUTPUT connector of the printer to the S VIDEO
input connector of the television, using the S
video connecting cable YC-15V (not supplied).
Note
You cannot use a television which has aerial
connectors only.
Connect the printer to the video
equipment.
Connect the VIDEO INPUT connector of the
printer to the VIDEO output connector of the
video equipment.
CVP-M3
To the VIDEO
INPUT
Camcorder or VCR with an S VIDEO output
a)
|
To the S woeo/|
a
output
Camcorder or VCR with a
VIDEO output only
{ Ct}
to the VIDEO output
=) -
cN.__:
Signal flow
If you have video equipment with an S VIDEO
output connector. connect the S VIDEO INPUT
connector of the printer to the S VIDEO output
connector of the video eqipment. using the S
video connecting cable YC-15 (not supplied).
Note
You cannot use the video equipment with aerial
connectors only.
Advertisement
Table of Contents
