Table of Contents
Advertisement
Making Basic Printouts
Wait about 60 seconds for the
printout (regular and sticker
print paper) to emerge from the
paper outlet. Open the printout
cover and take it out.
if you print in the FIELD mode,
FIELD A or FIELD B appears
here.
BACK TO BOURCE
A running figure appears while
printing process proceeds.
When the printing is over, the
following indications reappear
on the screen.
[I-CONF IRM
PRINT
BACK TO (SOURCE
(You cannot store a new
image until the printing is
finished.)
Notes
¢ To avoid malfunction, do
not unplug the power cord
from the wall outlet during
printing or other
operation. If you should
turn off the printer during
printing, it will complete the
printing in process and then
turn off automatically.
¢ If you turn off the unit, the
stored image is cancelled.
« Do not open the hatches for
checking a paper jam under
the printout cover and on
the bottom panel during
printing.
e As long as an error
message is displayed on the
screen, you cannot start
printing. Refer to "Error
Messages" on page 48.
e Do not leave more than 25
printouts on the paper
outlet.
e A black line may appear on
the right or left end of a
printout although no such
line appears on the screen.
This is due to a distortion in
the video signals and not
due to some trouble with the
printer.
printout. Also avoid putting a
printout under a plastic desk
mat. The color may stick to
the plastic surface.
Be careful not to spill volatile
organic solvents such as
alcohol onto the printouts. If
you do, picture on the
printout may be discolored.
To avoid degradation of the
color, do not place a printout
in locations subject to:
—high temperatures
—high humidity
—direct sunlight
—excessive dust
Advertisement
Table of Contents
