Table of Contents
Advertisement
Going Beyond the Basics
The unit can make a printout of
different images in 1/4 size or
1/16 size. First. select how to
store the image you want to print.
You can store the different or
strobe images in 1/4 size or 1/16
size. You can store multiple 1/4
size and 1/16 size images in a
full-size image in the process of
storing in memory.
Then, select how to print the
stored image. Besides printing as
usual, you can trim the image
into a heart shape or oval shape
and also print a portion of the
image for half-size printing in one
of the four positions selectable in
the menu.
The following are the steps to
display the MEMORY MODE
setting menu.
To erase the indications on the
screen
If the part of the picture you want
to check is covered with the
indications, press the DISPLAY
button. Indications on the screen
disappear but you can still
operate the unit with the buttons
on the unit and the remote
commander as before.
Make sure that the
Press the MENU
memory (capture)
button.
mode is set to
"FRAME."
If FIELD A BIA or FIELD 8
Bs is displayed in upper left
of the screen, open the sliding
lid on the top of the unit and
press the MEMORY SELECT
button to display FRAME EJ.
Then press the CAPTURE
button.
Each time you press the
MEMORY SELECT button, the| The background becomes
indication changes.
screen appears.
Selected item (sub-menu)
with the cursor is displayed
snseee
NE NLU oveoee
CAPTURE: MAGE
About memory (capture)
mode
While you are setting the
MEMORY MODE, you can
use the FRAME mode only.
if you set the memory mode to
"FIELD" and try to select
"MEMORY MODE" in the main
MENU, you cannot operate the
cursor control buttons and the
error message "Memory image
with Hil." appears on the
screen.
Operation indications are
displayed in white.
Current settings are'
displayed.
To erase the main MENU
Press the MENU button.
Advertisement
Table of Contents
