Table of Contents
Advertisement
Replacing the video print
cartridge
You cannot reuse a cartridge
which has been completely
used. Replace the cartridge
with a new one. If the
completely used cartridge is
still loaded in the unit, the error
message "Out of ink ribbon
please insert new cartridge."
appears on the screen. Pull
down the lever and remove the
cartridge as illustrated.
Pull down the lever.
Pull out the cartridge.
Caution
Never put your hand into the
cartridge compartment. The
thermal head reaches high
temperatures, especially after
repeated printing.
Notes on storing video print
cartridges
¢ Avoid placing the cartridge
in a location subject to:
— high temperatures
— high humidity
— excessive dust
—direct sunlight
When you are going to store
a partially-used cartridge for
an extended period of time,
store it in its original bag.
If your ink ribbon should
tear
Repair the ribbon with
transparent tape. There should
be no problem with using the
remaining portion of the
ribbon.
When you use a partially-
used video print cartridge
Wind the ink ribbon until the
black bar appears on the left.
Also, remove any slack.
Wind the spools of the cartridge
alternately as illustrated until a
black bar extending full-width of
the ribbon appears on the
extreme left.
Advertisement
Table of Contents
