Table of Contents
Advertisement
When the image you
To change the image stored
Press the PRINT
want to print
in memory
button.
appears, press the
Press the SOURCE button to
CAPTURE button to
display the playback picture
store it in memory.
again. When the image you
want to print appears, press
the CAPTURE button to store
a new image.
At the moment you press the
CAPTURE button, the printer
Starts to store the strobe
images in 1/4 size or 1/16 size.
Pranting
>>>>
a
BACK TO
To see the playback picture
during printing
Press the SOURCE button to
display the playback picture.
(You cannot store a new
image until the printing is
completed.)
ED ~- CHD
The selected position is
displayed in yellow.
The position where an image
can be stored next flashes in
blue. (The position flashes in
the order of upper left + upper
right — under left + under right
Te unio tres (HORE Scr.
ow)
STROBE 16 screen
Press the MENU button. If you
:
:
want to return to the normal
When the images are stored in
printing, select "MEMORY
all the positions, the stored
MODE" in the main MENU and
images are displayed in 1/4
select "NORMAL" in the
BACK TO (XK
The stored images are
displayed in 1/4 size or 1/16
size.
About the PRINT MODE
setting
If you select an item other than
"NORMAL! in the PRINT
MODE setting menu, you can
make a variety of printouts as
follows: Printing the same
STROBE 4 or STROBE 16
images in 1/4 size or 1/6 size*,
trimming the image into a heart
or oval shape and printing a
portion of the stored image. For
details, refer to "A Variety of
Print Settings (PRINT MODE
setting)" on pages 30 — 33.
*We do not recommend this
operation because the picture
quality of the multiplied
STROBE 4 or STROBE 16
images is rather poor.
Advertisement
Table of Contents
