Sony CVP-M3 Operating Instructions Manual page 29

Select where an
4 image is to be inset
with the ,v <>
buttons. When the
image you want to
inset appears, press
the CAPTURE
button.
Selected position flashes. (The
illustration shows the screen of
SPLIT 4 mode.)
When you press the
CAPTURE button, the stored
image is displayed.
Background full-size
image
The inset image
images, repeat steps
2, 3 and 4 in the
order.
5 To inset multiple
The stored image to be printed
is displayed on the screen.
An inset image in 1/16 size
Full-size background
image
An inset image in 1/4 size
in memory button.
Repeat steps 2, 3 and 4 to
replace the previous image.
To change the image stored 6 Press the PRINT
To confirm the stored image
Press the MEMORY RECALL
button. The stored image is
displayed.
[EI-CONF 1 RM ory: 1
If the playback picture is
displayed on the screen
As long as the playback picture
is displayed on the screen, you
cannot start printing. Press the a
display the stored image on the
screen and then press the
PRINT button.
Pranting
>>>>
About the PRINT MODE setting
If you select an item other than "NORMAL? in the PRINT MODE
setting menu, you can make a variety of printouts as follows:
Printing the same multiple inset image in 1/4 or 1/16 size*,
trimming the image into in a heart or oval shape and printing a
portion of the stored image. For details, refer to "A Variety of
Print Settings (PRINT MODE Setting)" on pages 30 - 33.
*We do not recommend this operation because the picture
quality of the multiplied images is rather poor.
To return to the normal printing
Press the MENU button. Select "MEMORY MODE" in the main
MENU and select "NORMAL" in the MEMORY MODE setting
menu.