Table of Contents
Advertisement
Going Beyond the Basics
This chapter explains how to set
the print mode of the stored
image so that you can make a
variety of printouts. Besides
printing in the normal mode, you
can print the stored image in 1/4
size (MULTI 4) or 1/16 size
(MULTI 16) and trim the image in
a heart or oval shape. You can
also print a portion of the image
for half-size printing in one of the
four positions selectable in the
menu.
30
When the image you
want to print
appears, press the
CAPTURE button.
-CONF 1PM
BACK TO SME
About the MEMORY MODE
setting
You can also select various
print settings for the SPLIT 4/
SPLIT 16 images or STROBE
4/STROBE 16 images which
have been stored in the
MEMORY MODE setting menu
(page 22). (However, we do
not recommend printing the
stored SPLIT 4/SPLIT 16 or
STROBE 4/STROBE 16
images using the 1/4- or 1/16-
size print setting because the
picture quality of the printout
will be rather poor.) In this
chapter, we will explain the
steps to set the print mode for
the "NORMAL" (full-size)
image.
Press the MENU
button.
The main MENU is displayed
on the screen.
snes ME NL ooeee
>PAT QTY -
1
CAPTION
- NO CAPTION
WEAORY MODE - NORMAL
PRAT MODE
=~ NORMAL
PCTURE Al, - STANDARD
ttem:Sd Next: Zit! End: KW;
Select "PRINT
MODE" with the « v
buttons and press
the EXEC button.
wo MENY om
eT
OTY
-
1
CAPTION
= NO CAPTION
WBIORY MODE - NORMAL
DPRAT WOKE
«=~ NORMAL
PCTURE 0.
- STANDARD
Item: Next: Tied End: Ru,
When you press the EXEC
button, the PRINT MODE
setting menu is displayed on
the screen.
PRINT MODE
> NORMAL
MULTI 4
MULTING
HEART SHAPE
OVAL SHAPE
HALF
Advertisement
Table of Contents
