The Service Life Of The Vehicle And The Disposal Of The Vehicle; Motorcycle Related Adjustment Data - KEEWAY RK V125 C User Manual

[Use after the vehicle is stored]
1. Remove the motorcycle cover and clean the motorcycle.
2. Check the battery voltage. If the voltage is below 12.8V, you must charge the battery at low speed before installing the battery.
3. Remove the anti-rust agent in the fuel tank and add new fuel.
4. Try riding the motorcycle in a safe place to check whether the performance of the motorcycle is normal.
XV. The service life of the vehicle and the disposal of the vehicle
[Vehicle life time]
Please follow the regulations of the traffic management department or the local vehicle management office for the use period of the vehicle.
EN
[Vehicle handling]
1. Disposal of waste lubricating oil: The waste lubricating oil from the replacement of motorcycles should be put into plastic drums and handed over
to the recycling company for disposal. You cannot discharge waste lubricating oil at will, otherwise it will cause damage to the environment such as
the site, soil, water source, etc.
2. Disposal of waste batteries, light bulbs, exterior parts, filter elements, tires, iron parts, aluminum parts and other parts: these scrap parts should
be recycled and processed separately. You can't throw it away at will, let alone dump the dilute sulfuric acid in the battery to cause harm to people
or cause pollution to the environment.
3. After the vehicle is scrapped, please dispose of it in accordance with the vehicle scrapping regulations of the traffic management department or
local vehicle management office.
XVI. Motorcycle related adjustment data
Front (hand) brake free stroke 5～10mm Free clearance of throttle handle: 2～6mm
Rear (foot) brake free stroke 10～20mm Clutch free stroke: 5～10mm
Spark plug gap: 0.8～0.9mm Inlet valve gap: 0.04-0.06mm,exhuast valve gap:0.08～0.12 mm
Torque value of rear shock absorber fastening bolt: 30～40 N·m and exhaust
Handle tightening bolt torque value: 4～6N·m Flat fork shaft tightening nut torque value: 70～90 N·m
Torque value of tightening nut of front wheel axle: 70～90N·m Torque value of tightening nut of steering system: 50～70 N·m
Torque value of tightening nut of rear wheel axle: 70～90 N·m
Torque value of fastening bolts of front shock absorber and upper connecting plate: 10～14N·m
Torque value of fastening bolts of front shock absorber and direction column: 20～25 N·m
Torque value of engine suspension fastening nut: M6：8～12 N·m M8：18～25 N·m，M10：30～40 N·m
61