KEEWAY RK V125 C User Manual page 125

8.1. Check the front brake disc
Fig. 24 Front brake disc inspection
Brake disc wear limit
Front 3mm
Rear 3mm
The brake disc will gradually wear out during long-term use, so it is necessary to check the
thickness of the brake disc at multiple positions of the brake disc. And check its appearance to
confirm whether the brake disc is damaged, cracked or deformed.
If the thickness of the brake disc is lower than the specified value: please replace the brake disc.
If the brake disc is damaged, cracked or deformed: please replace the brake disc
Warning:
The wear of the brake disc will reduce the thickness of the brake disc within the contact
surface of the brake friction lining, which will reduce the braking effect and threaten your
driving safety. Once damage, cracks, or deformation occur, please replace the brake disc
immediately.
When the brake disc is worn to the limit thickness of 3mm, it must be replaced; remove the
front brake caliper and front wheel, and then replace the brake disc.
49
EN