Ignition Switch Lock - KEEWAY RK V125 C User Manual

10
11
12
Note: When the upper button is pressed once, the total and subtotal of the mileage will be switched. When in the subtotal state, long-time presses
the button to clear the subtotal mileage.
EN
Long press the up button to enter the clock setting mode. At this time, press the up button once to switch the clock to adjust the position.
Press the button once to adjust the time.
4.3. Ignition switch
The ignition switch lock (Figure 5) is set in front of the steering handle, and the ignition switch must be turned on before starting the motorcycle.
The key position and function are shown in Table 2.
Water temperature alarm
indication
Marker light indication
Time indicator
Key position
The circuit is disconnected and the engine cannot be
OFF" "
started
ON" " The circuit is closed and the engine can be started
The circuit is disconnected and the steering
steering lock " "
mechanism is locked
Lights up and displays red: the coolant is overheated, and the cooling system is
faulty
Front position lamp, instrument panel lighting lamp, rear position lamp light up
Display current Beijing time
Function
Table.2
16
Key state
Can be unplugged
Not unplugged
Can be unplugged