Ricoh SP C240SF Operating Instructions Manual page 390

9. Troubleshooting
Message
Memory Overflow
Memory Overflow
TX
Cancel
Misfeed: Dup. Unit
Remove Paper
Misfeed: Paper Tray
Misfeed: Stnd. Tray
9
Misfeed: Tray 1
Misfeed: Tray 2
Net Communication
Error
Network is not Ready
On Hook or Stop key
388
Causes
• The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
sending a fax via LAN-Fax.
Memory has reached capacity
while scanning the second or
later pages of the original when
trying to send a fax in Memory
Transmission mode.
Paper has been jammed in the
duplex unit.
Paper has been jammed in the
paper tray.
Paper has been jammed in the
paper exit area.
Paper has been jammed in the
ADF input tray.
Paper has been jammed in the
ADF output tray.
Connection with the server was
lost while sending or receiving
data.
A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
The machine has been off-hook
for an extended period of time.
Solutions
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Press [TX] to send only the pages that have
been scanned in memory, or press
[Cancel] to cancel.
Remove the jammed paper. See p.358
"Removing Printing Jams".
Remove the jammed paper. See p.358
"Removing Printing Jams".
Remove the jammed paper. See p.358
"Removing Printing Jams".
Remove the jammed paper. See p.364
"Removing Scanning Jams".
Remove the jammed paper. See p.364
"Removing Scanning Jams".
Contact the network administrator.
Wait until the machine receives the IP
address information completely, and then
try the operation again.
Put down the handset or press the [Clear/
Stop] key.