Ricoh SP C240SF Operating Instructions Manual page 223

• Press the [Escape] key to discard the current change and return to the initial screen.
• You can change the machine's default [Density] setting to always scan with a specific density level.
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed.
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
• For details about [Density], see p.262 "Fax Transmission Settings".
• For details about [System Auto Reset Timer], see p.295 "Administrator Settings".
Specifying the resolution
This section describes how to specify the scan resolution for the current job.
There are three resolution settings:
Standard
Select this when the original is a printed or typewritten document with normal-sized characters.
Detail
Select this when the original is a document with small print.
Photo
Select this when the original contains images such as photographs or shaded drawings.
1. Press the [Image Quality] key.
2. Press the [ ][ ] keys to select the desired resolution setting, and then press the [OK] key.
CES179
Sending a Fax
6
221