Configuring The System Settings; Configuring The Sound Volume - Ricoh SP C240SF Operating Instructions Manual

Configuring the System Settings

Click [System Settings] to display the page for configuring the system settings.
This page contains the following tabs: [Sound Volume Adjustment], [Tray Paper Settings], [Copier],
[Fax], [Priority Tray], [Toner Saving], [I/O Timeout], and [B&W Print Priority].

Configuring the Sound Volume

Click the [Sound Volume Adjustment] tab on the system settings page to configure the sound volume
settings.
Sound Volume Adjustment
Item
Panel Key Sound
Ring Volume
On Hook Mode
Job End Tone
Job Error Tone
Alarm Volume
Select the volume of the beep that sounds when a key is pressed from [Off],
[Low], [Middle], or [High].
Select the volume of the ring when a call is received from [Off], [Low],
[Middle], or [High].
Select the volume of the sound from the speaker during on hook mode from
[Off], [Low], [Middle], or [High].
Select the volume of the beep that sounds when a job is complete from
[Off], [Low], [Middle], or [High].
Select the volume of the beep that sounds when a fax transmission error
occurs from [Off], [Low], [Middle], or [High].
Select the volume of the alarm that sounds when an operation error occurs
from [Off], [Low], [Middle], or [High].
Configuring the System Settings
Description
8
315