Configuring The System Settings; Sound Volume Adjustment Tab; Tray Paper Settings Tab - Ricoh SP 311SFNw User Manual

Configuring the System Settings

Click [System Settings] to display the page for configuring the system settings.
This page contains the following tabs: [Sound Volume Adjustment], [Tray Paper Settings], [Copier],
[Fax], [Priority Tray], [Toner Saving], [I/O Timeout], and [Shortcut to Function].

Sound Volume Adjustment Tab

Sound Volume Adjustment
Item
Panel Key Sound
On Hook Mode
Job End Tone
Job Error Tone
Alarm Volume

Tray Paper Settings Tab

Tray 1
Item
Paper Size
Paper Type
Select the volume of the beep that sounds when a key is pressed from [Off],
[Low], [Middle], or [High].
Select the volume of the sound from the speaker during on hook mode from
[Off], [Low], [Middle], or [High].
Select the volume of the beep that sounds when a job is complete from
[Off], [Low], [Middle], or [High].
Select the volume of the beep that sounds when a fax transmission error
occurs from [Off], [Low], [Middle], or [High].
Select the volume of the alarm that sounds when an operation error occurs
from [Off], [Low], [Middle], or [High].
Select the paper size for tray 1 from the following:
A4, B5 JIS, A5, B6 JIS, A6, 8 1/2 × 14, 8 1/2 × 11, 5 1/2 × 8 1/2, 7
1/4 × 10 1/2, 8 × 13, 8 1/2 × 13, 8 1/4 × 13, 16K, Custom Size
Select the paper type for tray 1 from the following:
Thin Paper (52 to 64g/m2), Thick Paper 1 (100 to 130g/m2), Thick
Paper 2 (131 to 162g/m2), Plain Paper, Recycled Paper, Color Paper,
Preprinted Paper, Prepunched Paper, Letterhead, Bond Paper, Cardstock,
Label Paper
Configuring the System Settings
Description
Description
177