6.3
Opening the burner
Disconnect the electrical supply from the burner by
means of the main system switch.
DANGER
Close the fuel interception tap.
DANGER
Wait for the components in contact with heat sourc-
es to cool down completely.
3
2
13
20026767
1
D10441
4"
14
Maintenance
To open the burner proceed as follows:
remove the screws 2)(Fig. 35) from the slide bars 3);
install the extension bars 4);
remove screw 1) and pull the burner back on slide bars 3) by
about 4" (Fig. 36);
disconnect the electrode wires and then pull the burner com-
pletely back;
unscrew the pin 8) from the connection 9)(Fig. 37);
push ahead the connection to the end stop on the plug
10)(Fig. 37), therefore extract the inner part of the combustion
head 12)(Fig. 36).
12
D10462
Fig. 36
28
GB
4
9
10
D10451
8
Fig. 35
Fig. 37