4.7.1
To open the burner
Switch off the electrical power.
WARNING
To open the burner proceed sa follows:
remove screws 2)(Fig. 16) and withdraw the cover 3);
remove the screws 4) from the slide bars 5);
install the extention bars 7);
remove screw 6) and pull the burner back 13) on slide bars 5)
by about 4";
disconnect the electrode wires and then pull the burner com-
pletely back;
unscrew the head fixing screw 11);
unscrew the pin 8)(Fig. 15) from the connection 9);
push ahed the connection to the end stop on the plug 10),
therefore extract the inner part of the combustion head 12).
13
20026767
Installation
12
4"
14
3
2
D10451
7
6
18
GB
9
10
8
5
4
11
D10438
Fig. 15
Fig. 16