Cleaning The Cooling System - Toro TimeCutter MyRIDE Owner's Manual

Servicing the Spark Plug (continued)
Installing the Spark Plug

Cleaning the Cooling System

1. Park the machine on a level surface, disengage the blade-control switch, and move the
motion-control levers outward to the P
2. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving
the operating position.
3. Remove the air filter from the engine.
4. Remove the engine shroud.
5. To prevent debris entering the air intake, install the air filter to the filter base.
6. Clean debris and grass from the parts.
7. Remove the air filter and install the engine shroud.
8. Install the air filter.
3466-517A
g027661s
position.
ARK
Page 5–12 Maintenance: Engine Maintenance