Toro TimeCutter MyRIDE Owner's Manual page 50

Engine-Oil Service (continued)
Changing the Engine Oil
1. Park the machine so that the drain side is slightly lower than the opposite side to ensure
that the oil drains completely.
2. Disengage the blade-control switch (PTO) and move the motion-control levers outward
to the P
3. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving
the operating position.
4. Drain the oil from the engine.
5. Slowly pour approximately 80% of the specified oil into the filler tube and slowly add the
additional oil to bring it to the Full mark.
6. Dispose of the used oil at a recycling center.
Maintenance: Engine Maintenance
position.
ARK
G454330
G235264s
Page 5–9 3466-517 A