Toro TimeCutter MyRIDE Owner's Manual page 65

Replacing the Mower Belt (continued)
7. Roll the belt off the pulleys.
8. Route the new belt around the engine pulley and mower pulleys.
9. Use the spring-removal tool to install the idler spring over the deck hook and place
tension on the idler pulley and the mower belt.
10. Tighten the nut securing the wire form to the idler pulley.
Note:
11. Install the pulley covers.
3466-517A
G454314
Position the wire form against the idler arm.
Page 5–24
Deck pulley
Mower belt
Engine pulley
Idler pulley
Spring
Spring-removal tool
Maintenance: Belt Maintenance