Inspecting The Cooling System Hoses; Cleaning The Engine Cooling System - Toro Reelmaster 5610-D Operator's Manual

Checking the Coolant Level (continued)
Cap (coolant reservoir)
4. If the coolant level is low, remove the coolant-reservoir cap and add the specified
coolant until the level it is at the cold mark (for a cold engine) or hot mark (for a hot
engine).
Note:
5. Install the coolant-reservoir cap.
6. Close and latch the hood.

Inspecting the Cooling System Hoses

Inspect the cooling system hoses for leaks, kinked lines, loose mounting supports, wear,
loose fittings, weather deterioration, and chemical deterioration.
Note:

Cleaning the Engine Cooling System

1. Prepare the machine for maintenance.
2. Raise the hood.
3464-486A
Do not overfill the expansion tank with coolant.
Make all necessary repairs before operating.
G452997
Hot engine-coolant mark
Page 6–32
Cold engine-coolant mark
Maintenance: Cooling System Maintenance