Installing the Back Cushion Connecting the Battery Machines with a 60-Inch Deck No Parts Required Shipped in a Steel Crate Only Procedure Parts needed for this procedure: WARNING Back cushion Flanged-hex bolt CALIFORNIA Proposition 65 Warning Battery posts, terminals, and related Procedure accessories contain lead and lead 1.
Page 3
Installing the Rear Hitch Setting Up the Motion-Control Levers Parts needed for this procedure: Rear hitch No Parts Required Bolt (5/16 x 1 inch) Procedure Locknut (5/16 inch) 1. Locate the motion-control levers attached, but folded down on the machine. Procedure 2.
Parts needed for this procedure: Ignition key Hose coupling (not included with CE models) Operator's Manual Engine owner’s manual (non-Toro engines) Operator training material Checking the Tire Pressure Remove the packing restraint holding the side discharge chute up and lower the chute into place.