Am Operation - Kenwood TS-450S Instruction Manual

4-6. AM OPERATION
RECEIVING
32
The center frequency is displayed.
M.CH/VFO CH NOTCH ~@~ SaL
CEI
Sp 6
59000
=
Turn on the DC power supply and then turn the transceiver's power switch ON.
A frequency will appear in the display.
Press the UP/DOWN switches to select the desired frequency band.
When the 1 MHz step position is selected, the 1MHz indicator will light.
Select AM with the MODE key.
Make sure "6k" on the 8.83MHz filter display is on.
Make sure "6k" on the 455kHz filter display is on.
Turn the AF gain control clockwise until a signal or noise is heard.
Rotate the TUNING knob and select an open channel.