Kenwood TS-450S Instruction Manual page 28

4-4. CW OPERATION
RECEIVING
The transmit frequency is displayed.
M.CH/VFO CH NOTCH ~@-saL
o
RITAIT -@- IF SHIFT AF -@- RF
sar | 5
|_— ql) Ey
40 qoeocenoeromr
"OOO OO
—
Turn on the DC power supply and then turn the transceiver's power switch ON.
IN
A frequency will appear in the display.
(2) Press the UP/DOWN switches to select the desired frequency band.
When the 1 MHz step position is selected, the 1MHz indicator will light.
aN
Select CW with the MODE key.
ja Turn the AF gain control clockwise until a signal or noise is heard.
fe)
Rotate the TUNING knob and select an open channel.
CW Reverse
1. Beat-frequency interference can be reduced.
2. The beat tone changes from low to high when the tuning control is turned clockwise
(the receive frequency gose high), improving operability.
28