Operation Operating Controls - Kenwood TS-850S Instruction Manual

4. OPERATION
4-1. OPERATING CONTROLS
4-1-1. Front Panel
Note
All segments on the Display Panel and Indicators
are shown on for this explanation.
woren Oso eves NPE,
Gog
jealac
Cow} (os)
8.03 455 MCh PRG SCAN SCR PITCH SPLIT FLoce #17 xIT
use cw-e Fsk-e FUN
fos & 8 88ae8a BB... "BB Bw
B thusnuto om
PHONES
ae ae
PROC ~@—MON) = MIC PR
oO
(@ POWER switch
Press to turn the power ON or OFF.
@ DIM (Dimmer) switch
Selects the intensity of both the digital display and
the meter illumination, bright or dim.
@ VOX/MAN switch
VOX (Voice Operated Switch) operation is possible
in SSB, AM or FM operations. Break-in operation is
possible in CW operation. To activate the VOX
circuitry place the VOX switch ON(m).
10
@FULL/SEMI (Break-in) switch
© AIP (Advanced Intercept Point) switch
Use AIP when good signal reception can not be
obtained. When switched on, it reduces interference
from strong signals.
When the frequency falls below 9.5 MHz,
initialization takes place automatically.
Note
When AIP is on, the sensitivity of the receiver is
reduced about 10 dB.
@®HIGH BOOST switch